Papers by Keyword: High Purity Semi-Insulating (HPSI) Substrate

Abstract: Planar MESFETs were fabricated on high-purity semi-insulating (HPSI) 4H-SiC substrates. The saturation drain current of the fabricated MESFETs with a gate length of 0.5 μm and a gate width of 100 μm was 430 mA/mm, and the transconductance was 25 mS/mm. The maximum oscillation frequency and cut-off frequency were 26.4 GHz and 7.2 GHz, respectively. The power gain was 8.4 dB and the maximum output power density was 2.8 W/mm for operation of class A at CW 2 GHz. MESFETs on HPSI substrates showed no current instability and much higher output power density in comparison to MESFETs on vanadium-doped SI substrates.

Abstract: 4H-SiC planar MESFETs were fabricated using ion-implantation on high-purity semi-insulating substrate, and their DC and RF performances were characterized. A modified RCA method was used to clean the substrate before each procedure. Sacrificial oxide was grown after channel layer etching to eliminate plasma damage to the gate region. A thin, thermal oxide layer was grown to passivate the surface and then a thick field oxide was deposited by CVD. The maximum oscillation frequency of 26.4 GHz and the cut-off frequency of 7.2 GHz were obtained. The power gain was 8.4 dB and the output power was 2.8 W/mm at 2 GHz.