Papers by Keyword: Positron Microbeam

Abstract: We have developed a positron microbeam using magnetic lenses based on the commercial scanning electron microscope. The minimum beam diameter was 1.9 μm on target. Two-dimensional image of S parameter was successfully obtained. Using this apparatus, S parameter distribution around the crack tip introduced by a stress corrosion cracking of a stainless steel was obtained. S parameter increases at the further region of the tip of the crack. This shows that vacancy type defects may be generated as crack precursor.

Abstract: Slow positron beam was injected into a non-tapered glass capillary which was tilted angle of θ from the beam axis by a movable stage. Beam profiles of the positrons transported through the capillary were observed with a phosphor screen combined with micro channel plates as a function of θ. Some fraction of positrons was deflected with the tilting angle of the capillary.

Abstract: To improve the spatial resolution of positron annihilation spectroscopy (PAS), a system to produce an intense positron microbeam was developed in AIST. A slow positron beam, which was produced by an electron linear accelerator, was focused by a lens onto a remoderator to enhance its brightness. The brightness-enhanced beam with an intensity of ≈1 × 106 e+/s was extracted from the remoderator and focused onto the sample by a lens. The beam size at the sample was 25 μm, which is more than two and half orders of magnitude smaller than that in the magnetic transport system (≈10 mm). Hence, the spatial resolution of PAS with an AIST positron microbeam can be drastically improved relative to PAS using conventional methods.