Papers by Keyword: Silver Electrode

Abstract: Till to date, fabrication of Ionic Polymer-Metal Composites (IPMC) are carried out successfully using noble metal such as platinum/gold as the surface electrode. In this work we have proposed cost effective fabrication method for IPMC actuator using non-precious metal electrode of silver (Ag). Chemical decomposition method is followed using Nafion as the ion exchange membrane to fabricate pure Ag-electrode IPMC. Microscopic and morphological analyses reveal that, silver particles penetrate well through the surface of Nafion membrane. The bending deformation measurement and analysis of the thermo-mechanical properties of the fabricated IPMC is carried out. The experiment results and performance of the IPMC actuator confirm that the fabrication of pure Ag-IPMC is feasible and can be used as artificial muscle material.

Abstract: The TFTs array fabrication process for large-area TFT-LCD has been continuously developed for simplifying processing steps, improving performance and reducing cost in the process of mass production. In this study, the hydrogenated amorphous silicon (a-Si:H) TFTs with low resistivity electrodes , silver thin films, were prepared by using the selective deposition method that combined lift-off and electroless plated processes. This developed process can direct pattern the electrode of transistor devices without the etching process and provide ease processing steps. The as-deposited Ag films were annealed at 200 oC for 10 minutes under N2 atmosphere. The results shows that the adhesion properties can be enhanced and the resistivity has been improved from 6.0 μ,-cm, significantly decrease by 35%, of as-deposited Ag films by annealed. The thickness of Ag thin film is about 100 nm and the r. m. s roughness value is 1.54 nm. The a-Si:H TFT with Ag thin films as source and drain electrodes had a field effect mobility of 0.18 cm2/Vs, a threshold voltage of 2.65 V, and an on/off ratio of 3×104.