Materials Science Forum Vol. 1071

Abstract: The use of carboxylic acids in mix design alters the hydration process of cement, the resulting pore structure of the obtained cement paste, and, consequently, the mechanical properties of concrete. All these changes are directly related to the structure of the calcium silicate hydrate phase. In the present study, the effect of acetic acid and oxalic acid on the hydration of Portland-limestone cement was monitored using solid state ²⁹Si NMR spectroscopy. The results showed that acetic acid facilitated alite and belite hydration, however, the formation of polymerized silicate chains, incorporating Q²_p species, begun later than in pure cement paste. Oxalic acid accelerated the polymerization, but slowed down alite and belite hydration. Such behaviors may correspond to decreased porosity (acetic acid addition) and increased strength (oxalic acid addition). Both acids accelerated belite hydration, compared to the pure paste, likely due to an increased acidity of the pore solution. The findings provide structural information about C─S─H phase, to be considered for thaumasite sulfate attack investigations on Portland-limestone cement pastes containing carboxylic acids.