Search results

Another mechanism was proposed by Gartener et. al (2002) [21] that thin adsorption layers formed by organic compounds of wood wrap the cement grains and hinder the hydration of cement.
The first and second pre-treatment methods were selected to decrease the number of extractives of sawdust and subsequently reduce the effect of extractives on the hydration of cement.

Linse [9],1988 TiB2, Al2O3,Ti, TiAlloy HEP High density A.Niiler,T.Kottke,L.Kecskes [10]1988 TiB2, TiC SHS+ collision 80% grain size S.Wang, M.Meyers et.al. [12],1988 IN 718 HEP High density,still porous R.
In all examples shown in Table 1 it is evident, that improved values of density and strength of a number of hot compacted materials are obtainable.

However, in the actual production process, the CVD reactor reaction is more violent when the temperature is too high, resulting in a large number of amorphous silicon appearing in the CVD reactor and lowering the product quality.
The precipitated grains are deposited on the surface of the silicon rod disorderedly, leading to the silicon rods appear pimples on them and the thickness of the upper and lower diameters are different, silicon rod in the popcorn-like are producted.

In liquid-phase sintering, the presence of liquid can break the oxide-film and establish good interphase bonding between the primary Al grains and the SiC particles.
After the categorization, we have selected five micrographs on which feature parameters [7] describing pore sizes and shapes were measured: 1) Area (A): area occupied by the detected object (pixel) 2) Convex area (Ak): area of a complex closure surrounding the detected object (pixel) (1) Where di: size of the measured Feret-diameter, n: number of the measured Feret-diameter. 3) Roundness (R): shows the difference from a circle, R=1 in case of circle shaped objects (2) Where P: perimeter, A:area of the measured object. 4) Aspect ration (AR): ratio of the object's length and width (3) Where L

The validity of Power’s model was confirmed by a number of other studies (e.g. [4]).
Capillary pore radius also depends on the size of the particles (cement grains, additives - e.g. fly ash, silica fume) of the capillary system.

Number of wood chip energy plants is growing.
The origin of spontaneous combustion contributes mainly stored in large piles, humidity uneven grain size and the presence of residues other combustible materials.

Material characterization by SEM is used to see the structure of the surface topography, grain size, structural flaws, and the polluted content of a material.
The SEM results demonstrate that the membrane has better hydrophilicity and a more significant number of holes, implying that more compounds would be separated.

Effect of Selected Concrete Components Influencing the Concrete Elastic Modulus This experiment dealt with the evaluation of a series of proposals for the composition of concrete which mainly differed by the type and volume of the cement used, admixtures, number and the maximum grain of the fraction of the aggregate.

These processes lead to drastic improvement of the following properties of WRC: - increase the density and homogeneity of the structure; - provide high strength of adhesive bond in the system "coating-substrate" at moderate temperature; - form favorable residual compressive stresses in the layers of WRC and reduce level of stresses at the boundaries of the system "coating-substrate", - reduce dimensions of grains in the coating that increase its hardness while maintaining sufficiently high ductility (effect of nanostructure).
The value FMe is determined from the formula FMe=J0/eåni·ei·gi, where J0 is the current density; е is the state of electron charge; ei is the number of atoms/ions (N+, N2+, etc.); ni is the fractional component of each phase.

It is a highly dispersed styrene-acrylic oligomer with a low molecular weight (Mn ~ 6,800) and a high number average functionality (fn > 3).
The crystallization rate is known to consist of crystal nucleus formation and crystal grain growth.