Search results

The Young’s modulus values for the Ti–6Al–4V and β-Ti–12Mo–8Nb alloys were 155 and 103 Gpa, respectively, indicating a 33.5% reduction for the alloy described in the present work.
Calvert: Pearson’s handbook of crystallographic data for intermetallic phases, second ed., ASM, Metals Park Ohio, 1991

The reduction of tensile and fatigue strength approximately 10% and 40% respectively were reported [3-5].
In addition, the variation of the data increased as the thickness increased.

Corrosion is an electrochemical process involving the oxidation of a metal (the anodic reactions) and the corresponding reduction of another material (the cathodic reactions) [4].
And the result was inputted in the equation(1) to compute the rate of Corrosion (mg/mm2/yr): (1) Where: W = weight loss (gram) TSA = total surface area (mm2) T = time of exposure (days) Table 2.1 shows the data for the weight loss used for determining the rate of corrosion as in Table 2.2.

There are different thickness reduction for different parts is defined and carried out.
Wen, “FEA Modeling Verification and Validation : Correlating Model with Test Data by Optimization Analysis,” SAE Tech.

Its reduction in time consumption and increase in numbers of fish cake productivity were observed as well.
All data are recorded for determining the machine performance and shown in Table 1.

The soil sample was took from the field, then indoor rock mechanics tests were carried out to gain local soil physical mechanics parameters after a certain reduction of the experimental results.
Fig.3 Terrain contour map (local) and profiles for stability analysis According to geological exploration data and geological survey, the geological cross-sections of three chosen profiles for stability analysis are shown in Fig.4, Fig.5 and Fig.6.

The collected roughness data is indicated in table 1.
With the reduction of the step-down, the milling time was increased in the CNC machine.

Analysis of the proposed model The proposed front axle (shown in figure 6) has dimensions of cross section size : 165 mm x 79 mm with T section, design mass : 77.22 kg and material data as used in existing model.
References [1] Dilip K Mahanty, Vikas Manohar, Bhushan S Khomane and Swarnendu Nayak: Analysis and weight Reduction of a Tractor’s Front Axle, (2004)

The data has been analyzed using Analysis of Variance (ANOVA).
It can be seen from the main effect graphs that steam pressure and material of tool insert have the highest effect on the reduction of tool wear.

As a countermeasure reduction of insufficient resources and pollution, several authors have investigated the recovery of resources in byproduct and waste material [1, 2].
Due to the data of Fig.3 and Fig. 4, while considering cost, optimum dosage of sodium hydroxide is 60 g/L.