Search results

However, due to the long process duration and high manufacturing costs, the use of these materials is limited to aerospace application, e.g. antenna structures.
In contrast, the liquid silicon infiltration method (LSI) is characterized by short process cycle times and the use of low cost raw materials, like phenolic resins.
Due to these economic advantages, the C/SiC and C/C-SiC bulk materials are also used for brake discs and pads in automotive, aircraft and industrial applications, representing the main market for CMC materials [6-8].
Due to the lack of the experimental test results, the elastic material properties of a standard C/C–SiC material of 3-5 mm plate [12] is considered as the reference values for the evaluation of the elastic constants in z direction and under shear loads for the skin (1 mm thickness) and core materials (0.3 mm thickness).
Klett, "C/C-SiC Sandwich Structures Manufactured via Liquid Silicon Infiltration," Journal of Materials Science, submitted 2017

In our case it is always about an attempt to damage the building, or steal interesting (e.g. nuclear) material.
Kemp, Assessing the vulnerability of buildings, Journal of Applied Fire Science 14 (1) (2007) 53-61
Mueller, Assessing Measures Designed to Protect the Homeland, Policy Studies Journal 1(38) (2010) 1-21
Journal of Performance of Constructed Facilities 2(22) (2008) 115-120
In: Applied Mechanics and Materials.

The nanostructure materials of WO3/TiO2 photocatalyst have offered high surface-to-volume ratio and size confinement in radial-direction which leads to enhanced charge transfer property thus increases the photocatalytic activity.
The Fermi level of the two materials in heterostructures is the same which causes the longer photogenerated charge lifetime and the improved surface charge carrier transfer rate thus enhances the photocatalytic activity [36].
But there are very limited reports are available on heterostrectured materials as a photocatalyst.
Jothivenkatachalam, Dye Sensitized Solar Cell: A Summary, Materials Science Forum. 771 (2014) 1-24
Nihara, Titania Nanotubes Prepared by Chemical Processing, Advanced Materials 11 (1999) 1307-1311

European scholars also claim that now so-called new wall materials were all imitate the feature of fired brick and could only imitate one or several of that.
Acknowledgements This work was financially supported by the ChangSha Science and Technology Bureau (k0901083-11 ) Reference [1] Ding Da-jun.
Journal of Building Structures, 2008, 29(4): 1~9
Sichuan Building Science, 2009, 35( 6): 139~156
Advanced Research and Materials [J].2013

Biodegradable polymer is used as coating material because it can be degraded by microorganism when it excreted from the body [5].
Therefore, the polyblend of PLLA and PCL could be used as matrix material for simvastatin in control drug delivery system.
Karas, Statin-Associated Myopathy, Journal of the American Medical Association, 289 (2003) 1681-1690 [3] Y.
Thies, Microencapsulation, Encyclopedia of Polymer Science and Technology., John Wiley & Sons, Inc.2005 pp. 1–29 [5] X.
Mokhtarpour, Recrystallization of Drugs-Effect on Dissolution Rate, Recrystallization in Materials Processing, (2015) 191–211

References [1] Decree of the Minister of Infrastructure and Development of 17 July 2015 on the publication of a uniform text of the Regulation of the Minister of Infrastructure on technical conditions to be met by buildings and their location, Official Journal of the Republic of Poland, Dz.
Respondek, Effect of radiative cooling on heat transfer through building partitions, IOP Conference Series: Earth and Environmental Science. 214 (2019) 1-10 [10] PN-EN 673:2011 Glass in building - Determination of thermal transmittance (U value) - Calculation method
Kovsharov, Polymer films with multilayer low-E coatings, Materials Science in Semiconductor Processing. 38 (2015) 373–380
Stefanakos, A review of clear sky radiative cooling developments and applications in renewable power systems and passive building cooling, Solar Energy Materials and Solar Cells. 178 (2018) 115-128
Pei, General strategy of passive sub-ambient daytime radiative cooling, Solar Energy Materials and Solar Cells. 199 (2019) 108-113

Dupeux 1 1 Laboratoire de Thermodynamique et Physico-Chimie Métallurgiques UMR CNRS-INPG-UJF 5614, BP 75, 38402 Saint Martin d'Hères Cedex, France Alain.Galerie@ltpcm.inpg.fr 2 Ugine-ALZ, Arcelor Group, Centre de Recherches d'Isbergues, BP 15 62330 Isbergues Cedex, France 3 AGH University of Science and Technology, Faculty of Materials Science and Ceramics Department of Solid State Chemistry, Al.
Calculations were performed, taking into account the geometrical arrangement of the testing systems and the mechanical parameters of the deforming materials.
Test Inverted blister test 3-points bending test Tensile test ψ angle 25° 40° Not determined Materials and experimental procedures Oxidized samples.
Forum, this journal, this volume, (2004)

Masset1*, a, Agnieszka Bogusz1,b, Jan Sieniawski2,c, Bartek Wierzba3,d, Katarzyna Tkacz-Śmiech3,e 1Freiberg University of Mining and Technology Centre for Innovation Competence Virtuhcon Fuchsmühlenweg 9, Reiche Zeche D-09596 Freiberg, Germany 2Research and Development Laboratory for Aerospace Materials in Rzeszow W.
Pola 2, 35-959 Rzeszów, Poland 3Interdisciplinary Centre for Materials Modelling, FMSci&C AGH University of Science and Technology Al.
Coating characterisation Aluminisation of nickel specimens was carried out in the CVD BPXpro 325S commercial apparatus at the Research and Development Laboratory for Aerospace Materials in Rzeszow.
Acknowledgments This research has been partially funded by the Federal Ministry of Education and Research of Germany in the framework of Virtuhcon (project number 03Z2FN12) and by the Ministry of Higher Education and Science in Poland (project N N507 505138).
Janczak-Rusch: Journal of Applied Physics, 2011, in print (accepted on 18 Nov. 2011).

Material of grinding ring was AISI1045 substrate.
Chen: Materials Protection Vol.39 (2007) p.10-12.
Liu: Applied Surface Science Vol. 317 (2014), p. 378-384
Fu: Journal of Alloy and Compounds Vol.727 (2017), p.278-285
Zhang: Rare Metal Materials & Engineering Vol.46 (2017).

Popa” University of Medicine and Pharmacy, Department of Morpho-functional sciences.
Materials and Methods Our personal experience consists of 10 consecutive operated cases in 10 patients operated between 01-Jan-2013 and 01-Jan-2016 (3 years) in a single neurosurgical center in Bucharest, Romania, using anterior cervical surgical approaches.
[6] Stein H.L., Ultrahigh molecular weight polyethylenes (UHMWPE), Engineered Materials Handbook. 2 (1998) 167–171
[7] Tong J., Yunhai M., Arnell R.D., Luquan R., Free abrasive wear behavior of UHMWPE composites filled with wollastonite fibers, Composites Part A: Applied Science and Manufacturing 37 92006) 38-45
Journal of manipulative and physiological therapeutics 14 (1991) 409-415