Improving the Electrochemical Performance of LiFePO4/C Cathode by Selection of Carbon Source

Article Preview

Abstract:

LiFePO4/C composite was synthesized by an easy sol-gel method using FeC2O4•H2O as iron source, citric acid and ethylene glycol as carbon source. The results showed that citric acid was inclined to leave more carbon in the synthesized material than ethylene glycol was and the carbon content increased greatly with the increasing amount of citric acid. When ethylene glycol was applied as carbon source, it left only a few amount of carbon (1.6 wt%) in the material. By optimizing the addition of carbon source, LiFePO4/C particles with uniform carbon coating and a little carbon content was obtained. The LiFePO4/C composite synthesized with 1/1 ratio of ethylene glycol to cations demonstrated the best electrochemical performance with its capacity of 143 mAh/g at 0.1C and 110 mAh/g at 1C within the voltage range of 2.5-4.2V (vs. Li/Li+). The results will provide ideas for the improvement of overall properties of LiFePO4 material for its application in the field of electric vehicles.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

785-791

Citation:

Online since:

November 2012

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2012 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

[1] A.K. Padhi, K.S. Nanjundaswamy and J.B. Goodenough, J. Electrochem. Soc. Vol. 144 (1997), p.1188.

Google Scholar

[2] H. Huang, S.C. Yin, L.F. Nazar, Electrochem. Solid-State Lett. Vol. 4 (2001), p. A170.

Google Scholar

[3] Z.H. Chen, J.R. Dahn, J. Electrochem. Soc. Vol. 149 (2002), p. A1184.

Google Scholar

[4] M. Maccario, L. Croguennec, F. Weill, F. Le Cras and C. Delmas, Solid State Ionics Vol. 179 (2008), p.2383.

DOI: 10.1016/j.ssi.2008.09.005

Google Scholar

[5] X.D. Guo, B.H. Zhong, H. Liu, D.Q. Wu, Y. Tang and H. Tang, J. Electrochem. Soc. Vol. 156 (2009), p. A787.

Google Scholar

[6] C. Su, G. Lu, L. Xu, C. Zhang, J. Electrochem. Soc. Vol. 159 (2012), p. A305.

Google Scholar

[7] S. Shi, L. Liu, C. Ouyang, D.S. Wang, Z. Wang, L. Chen, X. Huang, Phys. Rev. B Vol. 68(2003), p.1951081.

Google Scholar

[8] I. Boyano, J. A. Blazquez, I. de Meatza, M. Bengoechea, O. Miguel, H. Grande, Y. H. Huang, J. B. Goodenough, J. Power Sources Vol. 195 (2010), p.5351.

DOI: 10.1016/j.jpowsour.2010.03.029

Google Scholar

[9] N. Meethong, Y. H. Kao, S. A. Speakman, Y. M. Chiang, Adv. Funct. Mater. Vol. 19 (2009), p.1060.

Google Scholar

[10] Y. Lin, M. X. Gao, D. Zhu, Y. F. Liu, H. G. Pan, J. Power Sources Vol. 184 (2008), p.444.

Google Scholar

[11] X. L. Wu, L. Y. Jiang, F. F. Cao, Y. G. Guo, L. J. Wan, Adv. Mater. Vol. 21 (2009), p.2710.

Google Scholar

[12] X. F. Zhou, F. Wang, Y. M. Zhu, Z. P. Liu, J. Mater. Chem. Vol. 21 (2011), p.3353.

Google Scholar

[13] Z. H. Chen and J. R. Dahn, J. Electrochem. Soc. Vol. 149 (2002), p.A1184.

Google Scholar

[14] Y. Yin, M. Gao, H. Pan, L. Shen, X. Ye, Y. Liu, P. S. Fedkiw, X. Zhang, J. Power Sources Vol. 199 (2012), p.256.

Google Scholar

[15] H. Pan, Y. Chen, C. Wang, J.X. Ma, C.P. Chen, Q.D. Wang, Electrochimica Acta Vol. 44(1999), p.2263.

Google Scholar

[16] M. X. Gao, Y. Lin, Y. H. Yin, Y. F. Liu, H. G. Pan, Electrochimica Acta, Vol. 55 (2010), p.8043.

Google Scholar