Paper Titles
The Effects of Nb and Cr Addition on Mechanical and Chemical Properties of Cold-Rolled Ni3(Si,Ti) Intermetallic Foils
p.411
Microstructure and Mechanical Properties of In718 Alloy Produced with Twin-Scanning Atomizer
p.415
Dependence of Strain Rate and Environment on the Mechanical Properties of the Ni-19Si-3Nb-1Cr-0.2B Intermetallic Alloy at High Temperature
p.419
Effect of Isothermal Forging on Microstructures and Mechanical Properties of Nb-Si In Situ Composite
p.423
High Temperature Oxidation Behavior of MoSi2 under Low Pressure Atmosphere
p.427
Reliable Titanium Aluminide Texture Measurement Using EBSD
p.431
Phase Equilibria between γ-Fe (A1) and Fe2Ti Laves (C14) Phases and Microstructure in Fe-Ti-Ni Ternary System at Elevated Temperatures
p.435
Mechanical and Physical Properties of Ni3Al-Based Alloys with Cr Carbides Dispersion
p.439
Defect Generation in Some Transition-Metal Silicides in Accommodating the Deviation from the Stoichiometric Compositions
p.443

High Temperature Oxidation Behavior of MoSi2 under Low Pressure Atmosphere

Article Preview

Abstract:

In this study, the high temperature oxidation behavior of polycrystalline MoSi2 in a low-pressure atmosphere was investigated. Polycrystalline MoSi2 was produced by the spark plasma sintering process. Oxidation tests were carried out at 1500°C at either 10Torr or 760Torr in an Ar-20%O2 atmosphere. For both conditions, the weight change peaked at the initial oxidation stage, and then their weights gradually increased with increasing oxidation time. The sample weight became heavier in the ambient pressure than in the low-pressure, but the evaporation oxidation was not significant in the low-pressure condition. After the low-pressure oxidation tests, the formation of Mo5Si3 in the MoSi2 substrate was identified. The oxidation resistance of MoSi2 at 1500°C is discussed based on the obtained results.

You might also be interested in these eBooks
PRICM 6 View Preview

Info:

Periodical:

Materials Science Forum (Volumes 561-565)

Pages:

427-430

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.561-565.427

Citation:

Cite this paper

Online since:

October 2007

Authors:

Akira Ibano, Kyosuke Yoshimi, Akira Yamauchi, Rong Tu, Kouichi Maruyama, Kazuya Kurokawa, Takashi Goto

Keywords:

High-Temperature, Intermetallic Compound (IMC), Low Pressure, MoSi2, Oxidation

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2007 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] J.J. Petrovic and A.K. Vasudevan: Mater. Sci. Eng. A 261 (1999), p.1.

Google Scholar

[2] D.M. Dimiduk and J.J. Perepezko: MRS Bull. 28 (2003), p.639.

Google Scholar

[3] R. Mitra: Inter. Mater. Rev. 51 (2006), p.13.

Google Scholar

[4] K. Yoshimi, S. Nakatani, N. Nomura and S. Hanada: Intermetallics 11 (2003), p.787.

Google Scholar

[5] K. Yoshimi, S. Nakatani, T. Suda and S. Hanada: Intermetallics 10 (2002), p.407.

Google Scholar

[6] E. Fitzer: Corrosion and Corrosive Degradation of Ceramics, edited by E. Fitzer, R.E. Tressler and M. McNallan, Am. Ceram . Soc., Westerville (1989), p.19.

Google Scholar