Papers by Author: Kazuki Tajima

Abstract: Micro-thermoelectric hydrogen sensor (micro-THS) with the combination of the thermoelectric effect of Si0.8Ge0.2 thin film and the Pt-catalyzed exothermic reaction of hydrogen oxidation was prepared by microfabrication process. In the viewpoint of high sensitivity of micro-THS, the thermoelectric properties of the Si0.8Ge0.2 thin film could be improved by optimizing carrier concentration using helicon sputtering with an advantage of easy doping control, and sensitivity of the device with this thin film was investigated. As the result, the boron-doped Si0.8Ge0.2 thin film is considered to be the better choice ensuring the reliable monitoring of hydrogen concentration down to ppm level.

Abstract: To integrate the ceramic Pt/alumina catalyst on micro-hotplate of micro-thermoelectric hydrogen sensor (micro-THS), a dispenser technique was used in this study. This micro-THS with the Pt/alumina catalyst is capable of sensing wide range hydrogen concentration of 50 ppm to 3 % at room temperature. For hydrogen/air mixture gas of 50 ppm, voltage signal is measured to be 0.03 mV at room temperature.

Abstract: Micromachined sensors are a new generation of sensor technology combining existing integrated circuit fabrication technology with novel deposition and etching processing. In the viewpoint of low-power operation, high sensitivity and fast response speed of thermoelectric hydrogen sensor (THS), we prepared the micromachined thermoelectric hydrogen sensor (micro-THS) with the combination of the thermoelectric effect of SiGe thin film and the Pt-catalyzed exothermic reaction of hydrogen oxidation. The power consumption of the micro-THS was greatly reduced to be 50 mW for 100 °C operating, by the Pt-micro-heater on single membrane. The micro-THS with 40 wt.% Pt/alumina catalyst showed voltage signal of 10 mV for 1 % H2 in air.