Papers by Keyword: Wafer Mapping

Abstract: This work reports DC electrical characterization of a 76 mm diameter 4H-SiC JFET test wafer fabricated as part of NASA’s on-going efforts to realize medium-scale ICs with prolonged and stable circuit operation at temperatures as high as 500 °C. In particular, these measurements provide quantitative parameter ranges for use in JFET IC design and simulation. Larger than expected parameter variations were observed both as a function of position across the wafer as well as a function of ambient testing temperature from 23 °C to 500 °C.

Abstract: Correlation between carrier lifetime and forward voltage drop in 4H-SiC PiN diodes has been investigated. PiN diodes from the drift layer of 20 m shows breakdown voltage of 3.3 kV and forward voltage drop as low as 3.13 V at 100A/cm2. Variation of calculated forward voltage drop ( ) from measured carrier lifetimes is very comparable to measured of fully processed PiN diodes. Measured carrier lifetime and of PiN diodes also show good spatial correlation. Wafer level lifetime mapping can be employed to assess and predict of PiN diodes.

Abstract: A non-destructive technique to image the dislocations and other extended defects in SiC epitaxial layers has been developed. Basal plane dislocations (BPDs) and threading dislocations (TDs) are imaged. Photoluminescence from the dislocations is excited with the 364 and/or 351 nm lines of an argon ion laser and near-infrared light is collected. A computer controlled probe station takes multiple images and the mm-sized images are stitched together to form whole-wafer maps. The technique is applied to a set of four n+ wafers from the same boule with 50 um n- epitaxial layers. The epitaxy was grown with Cree’s low-BPD process. BPDs form as either single, isolated dislocations or as clusters encircling micropipes. The concentration of TDs is on the order 104/cm2 and the local concentration varies more than an order of magnitude. The advantages of mapping dislocations by UV-PL imaging compared to other techniques are discussed.