Dynamic Test Experimental Studies on Printing Pressure Based on Two-Dimensional Holospectum

Abstract:

a proper printing pressure is a basic condition for realizing offset printing and is also quality guarantee of printed products. The printing pressure should be adjusted on time according to different thickness of paper and requirements. At present, the printing pressure is mainly tested statically and pre-commissioned by experiences, so it can not reflect size of the real printing pressure and no dynamic commissioning can be carried out. In this paper, the hoho-spectrum analysis method was adopted to analyze the vibration displacement signals of cylinders, so as to obtain central displacement of two cylinders and distance and to indirectly obtain pressure between the two cylinders. The test results showed that the method could test the printing pressure effectively and dynamically.

• Periodical: Applied Mechanics and Materials (Volumes 121-126)
• Pages: 1465-1469
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.121-126.1465
• Online since: October 2011
• Authors: Yi Jun Chen, Qing Hai Zhao, Jing Yi Bai
• Keywords: Condition Monitoring, Printing Pressure, Two-Dimensional Holo-Spectum

References

[1] Wu Shuqin etc Research on the Methods of the Measurement of Printing Pressure in Offset Press 2009 International Conference on Measuring Technology and Mechatronics Automation.

DOI: 10.1109/icmtma.2009.211

[2] Zhang shaohua, et al. Theoretical and Experimental studies on Distribution Rules of Printing Pressure of an Offset Printing Machine. Packaging Engineering, Vol. 31 No. 7 2010. 04 (In Chinese).

[3] Yu Jieyue, etal. Error Analysis on Calculation of Printing pressure. Packaging Engineering, Vol. 29 No. 7 2008. 07 (In Chinese).

[4] Hou Heping, et al. Experimental Study on the Printing Pressure and Ink Transfer Characteristics. Packaging Engineering, Vol. 29 No. 12 2008. 12 (In Chinese).

[5] Li Chunwei, Fang Haifeng. Research and Analysis of the Control in the Offset Printing Pressure. Mechanical Engineer, 2010, No. 1 (In Chinese).

[6] Wang Anling, et al. Computational Method of Pressure Distribution of Printing Ink between Two Cylinders of Printer. Packaging Engineering, Vol. 30 No. 1 2009. 01 (In Chinese).

[7] Liu Linlin, et al. Pressure Simulation and Structure Optimization on Printing Cylinder Based on Finite Element Contact Analysis. 2010 Proceedings of China Printing and Packaging Conference (In Chinese).

[8] Yuan Ruoping, Xiao Yan. Elastic Deformation and Pressure Control of Printing Cylinder. Journal of Jiamusi University (Natural Science Edition), Vol. 27, No. 6, November 2009 (In Chinese).

[9] Qiu Chao, et al. Development of Typography Pressure Determination Instrument. Instrument Technique and Sensor, No. 9, 2010 (In Chinese).

[10] Du Yongzuo, Qin Zhiying. Holo-spectrum Analysis of Rotating Machinery Dynamic Signals [J]. Journal of Vibration, Test & Diagnosis, 2002, 22 (2): 81~88 (In Chinese).

[11] Du Yongzuo, Qin Zhiying. Holo-spectrum Analysis of Rotating Machinery Dynamic Signals [J]. Journal of Vibration, Test & Diagnosis, 2002, 22 (2): 81~88 (In Chinese).