Preparation of Bio-Oil-Phenol-Formaldehyde Resins from Biomass Pyrolysis Oil

Abstract:

Three kinds of bio-oil-phenol-formaldehyde (BPF) resins were prepared which contained 30 wt% replacement of phenol with bio-oil derived from poplar, larch and bamboo. Main component of different pyrolysis bio-oil, physical properties of different BPF resins and their plywood specimens were investigated. The results show that phenolics in bio-oil derived from poplar, larch and bamboo are 13.8653%, 14.7529% and 10.3987%. All the experimental BPF resins have similar physical properties, which comply with GB/T 14732-2006. The performance of the plywood specimens bonded with different BPF resins were larch-BPF > poplar-BPF > bamboo-BPF, all of which could achieve the demands of GB/T 9846-2004.

• Periodical: Applied Mechanics and Materials (Volumes 174-177)
• Pages: 1429-1432
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.174-177.1429
• Online since: May 2012
• Authors: Jiang Ping Yi, Ji Zong Zhang, Si Xu Yao, Jian Min Chang, Ben Li
• Keywords: Bio-Oil, Bonding Strength, BPF, Physical Properties

References

[1] A. Knop and L.A. Pilato: Phenolic Resins, (Springer, Berlin, 1985).

[2] D.L. Klass: Biomass for renewable energy, fuels and chemicals. (US: Academic Press, San Diego, 1998).

[3] D.B. Fan and J.M. Chang: The Journal of Adhesion, Vol. 86: 8(2010), pp.834-843.

[4] X.M. Wang, M.D. Myers and S.S. Kelly: Proceedings of the 31th International Particleboard/ Composite Materials Symposium. WA, USA (1997), p.199.

[5] D.A. Himmelblau and G.A. Grozdits: Proceedings of the 4th Biomass Conference of the American. USA (1999), pp.541-547.

[6] Amen Chen C., XiangMing Wang, et al.: Holzforschung, Vol.56: 2(2002), pp.167-175.

[7] GB/T 14732-2006, Wood Adhesives: Urea Formaldehyde, Phenol Formaldehyde and Melamine Formaldehyde Resins.

DOI: 10.1201/b12180-19

[8] GB/T 9846-2004, Plywood.

[9] D.B. Fan, J.Zh. Li and J.M. Chang: European Polymer Journal, Vol.45: (2009), pp.2849-2857.