Workability of ZK60A Alloy Depending on Microstructure

K.H. Jung; Yong Bae Kim; Byung Min Ahn; Sang Mok Lee; Jong Sup Lee; Du Soon Choi; Geun An Lee

doi:10.4028/www.scientific.net/AMM.217-219.373

Paper Titles

Effect of Initial Texture on the Development of Microstructure and Mechanical Properties in AZ31 Magnesium Alloy after Rolling at 300°C
p.354

Influence of Jacket and Filling Materials Characteristics on PELE Effects
p.358

Influences of Ultrasonic Wave on Polycrystalline Alumina Fibers Synthesized
p.362

Rheological Behavior of Semisolid AlSi6Mg2 Alloy at Transient State
p.369

Workability of ZK60A Alloy Depending on Microstructure
p.373

Research on Synthesizing Process under Ultrasound Coupling and Refining Performance of Al-Ti-C Grain Refiner
p.377

Effect of Alloying Elements on Microstructure, Texture Development, and Mechanical Properties of Magnesium Alloys
p.382

Block Shear Strength of Single Shear Four-Bolted Connections with Aluminum Alloys – Experiment and Design Strength Comparison
p.386

Analysis on Fatigue Crack Propagation and Fractography of A7075 Aluminum Alloy
p.390

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 217-219Workability of ZK60A Alloy Depending on...

Workability of ZK60A Alloy Depending on Microstructure

Abstract:

In this study, the variation of workability of semi-continuously casted and extruded ZK60A magnesium alloy was investigated. To determine the deformation capability of two different billets, uniaxial compression tests were conducted at elevated temperatures and two different strain rates. In addition, the microstructural evolution was investigated using electron backscatter diffraction (EBSD) to compare the microstructure before and after the extrusion. The formability of ZK60A depending on the microstructure is discussed based on the experimental results obtained in this study, and is compared with earlier research in the literature.

You might also be interested in these eBooks

Advanced Materials and Process Technology

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 217-219)

Pages:

373-376

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.217-219.373

Citation:

Cite this paper

Online since:

November 2012

Authors:

K.H. Jung, Yong Bae Kim, Byung Min Ahn, Sang Mok Lee, Jong Sup Lee, Du Soon Choi, Geun An Lee

Keywords:

Continuous Casting, Extrusion, Fracture, Magnesium Alloy, Workability

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] P. Juchmann, in: Magnesium Technology, edited by H.E. Friedrich, B.L. Mordike, Springer, Germany (2010).

Google Scholar

[2] N. Ogawa, M. Shiomi, K. Osakada: Int. J. Mach. Tool Manu. Vol. 42 (2002), pp.607-614

Google Scholar

[3] P. Skubisz, J. Sińczak, S. Bednarek: J. Mater. Process. Technol. Vol. 177 (2006), pp.210-213

Google Scholar

[4] G. Quan, T. Ku, W. Song, B. Kang: Mater. Design Vol. 32 (2011), pp.2462-2468

Google Scholar

[5] X. Yu-feng, Q. Guo-zheng, Z. Jie: T. Nonferr. Metal. Soc., Vol. 20 (2010), pp. s580-s583

Google Scholar

[6] Y. Chino, M. Mabuchi, K. Shimojima, Y. Yamada, C. Wen, K. Miwa, M. Nakamura, T. Asahina, K. Higashi, T. Aizawa: Mater. Trans. Vol. 42(3) (2001), pp.414-417

DOI: 10.2320/matertrans.42.414

Google Scholar

[7] D. Orlov, G. Raab, T. T. Lamark, M. Popov, Y. Estrin: Acta. Mater. Vol. 59 (2011), pp.375-385

Google Scholar

[8] H.T. Kang, T. Ostrom: Mat. Sci. Eng. A-Struct. Vol. 490 (2008), pp.52-56

Google Scholar

[9] S.K. Guan, L.H. Wu, P. Wang: Mat. Sci. Eng. A-Struct. Vol. 499 (2009), pp.187-191

Google Scholar