The Design and Simulation of the Array Induction Logging Tools’ Signal Conditioning Circuit

Abstract:

Array induction logging tools (AILT) detects the stratum conductivity based on the principle of electromagnetic induction, as a result, the signal of the amplitude using the AILT is in microvolt level. The small-signal is always drowned by noise at high-temperature and high-pressure condition. In order to collect the weak signal accurately, we propose a design method of signal modulator circuits based on the principle of differential amplifier and active band-pass filter with second band limitless gain and multi-path negative feedback. First, make the induction signal obtained from the coil two stages amplification. Then Execute two-order band-pass filter to the enlarged signal. At last, process the filtered signal by the backward circuits. Simulating the circuits by Pspice16.3, The result of simulation indicated that the gain relative error of preamplifier is less than 1% and the center frequency relative error of band filter is less than 4%. These data suggest that the relative error of the design circuits is less than routine instrument by 5%. So the Simulation verifies the feasibility of the signal modulator circuit.

• Periodical: Applied Mechanics and Materials (Volumes 241-244)
• Pages: 1010-1013
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.241-244.1010
• Online since: December 2012
• Authors: Yao Hu, Hong Lu Hu, Ding Jin Huang
• Keywords: AILT, Band Pass, Filter Simulation, Preamplifier

References

[1] Jianhua Zhang, Zhenghua Liu and JianXu. The principles and applications of electrical logging. 2002 M. NORTHWEST UNIVERSITY PRESS . Xi'an.

[2] CNPC Well Logging Laboratory. Logging technology training materials 2004 M. PETROLEUM INDUSTRY PRESS. Beijing.

[3] Huang Jialiang, Design and realization of the data acquisition system of the array induction logging tool 2010 J. Petroleum Instruments, 4 12.

[4] TAO Weishi, ZHONG Baigang, Design and test of signal conditioning circuit with high accuracy. Heilongjiang Electric Power, Vol. 18(2001), pp.33-4.

[5] LaiXing, The collecting data of drilling engineering  parameters system based on the DSP. 2006. D. Journal of Southwest Petroleum University. NanChong.

[6] Wu Jianqiang, Pspice simulation practice 2011 M. HARBIN INSTITUTE OF TECHNOLOGY PRESS. Harbin.