Effects of Warm Mix Asphalt (WMA) Additives on the Properties of WMA Mixtures

Article Preview

Abstract:

The objective of this research was to investigate the influence of Warm Mix Asphalt (WMA) additives on asphalt mixture properties through the laboratory testing programs such as air voids, tensile strength ratio (TSR), dynamic stability, and low temperature bending failure strain tests. The experimental design included the use of three WMA additives of Sasobit, Evotherm and Rediset, one base (unmodified) binder source, and one modified binder source. The WMA mixtures were compared to those of controls, i.e., mixtures without the additives. Results from this study showed that: (1) WMA mixtures with Rediset, Evotherm, and Sasobit had slightly higher air voids than Hot Mix Asphalt (HMA); (2) All WMA mixtures with SBS modified asphalt have lower TSR values than the original ones. The TSR of the WMA mixtures with base (unmodified) asphalt is not significantly different from HMA; (3) The WMA mixtures with SBS modified asphalt have lower values of the dynamic stability and bending failure strain than HMA, while the WMA mixtures with base asphalt are contrary, except with Rediset additives.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

2097-2102

Citation:

Online since:

January 2013

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2013 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

[1] Xiao, F., Punith, V. S., Putman, B., and Amirkhanian, S. N. Utilization of Foaming Technology in Warm-Mix-Asphalt Mixtures Containing Moist Aggregates. Journal of Materials in Civil Engineering, Vol. 23, No. 9, 2011, p.1328–1337.

DOI: 10.1061/(asce)mt.1943-5533.0000297

Google Scholar

[2] Gandhi, T. Effects of WMA Additives on Asphalt Binder and Mixture Properties. Ph.D. dissertation, Clemson Univ., Clemson, SC, (2008).

Google Scholar

[3] Kim, H., Lee, S. J., and Amirkhanian, S. N. Effects of Warm Mix Asphalt Additives on Performance Properties of Polymer Modified Asphalt Binders. Canadian Journal of Civil Engineering, Vol. 37, No. 1, 2010, pp.17-24.

DOI: 10.1139/l09-118

Google Scholar

[4] Yero, A. S., and Hainin, M. R. Influence of Organic Wax on Bitumen Characteristics. American Journal of Engineering & Applied Sciences. Vol. 4, No. 2, 2011, pp.265-269.

DOI: 10.3844/ajeassp.2011.265.269

Google Scholar

[5] Akisetty, C. K., Lee, S. J., and Amirkhanian, S. N. Laboratory Investigation of the Influence of WMA Additives on Long-term Performance Properties of CRM Binders. International Journal of Pavement Engineering. Vol. 11, No. 2, 2010, pp.153-160.

DOI: 10.1080/10298430903197225

Google Scholar