The Membrane Thickness Prediction of Solder Paste Process by Phase-Shifting Projection

Abstract:

Electronic products have become lighter and thinner nowadays. SMT includes three basic steps, namely solder paste print, electronic component adhesion and reflow[1]. This research tends to capture the image of fringe projection based on CCD with optical grating and reconstruct the 3D surface image of solder paste use triangulation measurement. The main ideal is using fringe projection method to observe the distortion of the fringe phenomenon caused by different heights of the surface. Last, the depth of the surface is computed under test variation and the 3D image is reconstructed.

• Periodical: Applied Mechanics and Materials (Volumes 284-287)
• Pages: 550-556
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.284-287.550
• Online since: January 2013
• Authors: Yu Fang Chung, Kun Lin Tsai, Tzer Long Chen, Yen Chu Hsu, Yi Hsuan Yu
• Keywords: Non-Contact, Phase-Shifting Projected Fringe, Sinusoidal Grating, Solder Paste

References

[1] Junwu Yeh, Using Artificial Neural Networks to Build a Quality Control System of SMT Stencil Printing Process, National Cheng Kung University Institute of Manufacturing Engineering, (2001).

[2] Hui-Chun Hu, Exploration of the Optimal Manufacturing Process of Solder Paste Stencil using Taguchi Method, National Kaohsiung University of Applied Sciences Electronic Engineering, (2011).

[3] Cang-Ya Liu, Noncontact profilometric measurement of 3-D diffuse objects using projected moire with digital video signal processing technique, Chung Yuan Christian University Mechanical Engineering, (1989).

[4] Yi-Ling Hsu, Data fusion of 3D profiles measured by projected fringe profilometry, Sun Yat-sen University Institute of Materials Science, (2005).

[5] Hong-Ming Chen, Application of two frequency fringe pattern for phase-shifting projected fringe profilometry, Sun Yat-sen University Institute of Materials Science, (2005).

[6] Hsin-Hsueh Wu, Reconstruction of Three Dimensional Surface by Projection Fringe, Institute of Biomedical Engineering, National Cheng Kung University, (2007).

[7] Je-You Guo, Characteristics and analysis of calibration-based phase-shifting projected fringe profilometry, Sun Yat-sen University Institute of Materials Science, (2005).

[8] Huang-Chao Chang, The application of phase-stepping shadow moire in the semi-conductor and electronic package, National Taiwan University Institute of Applied Mechanics, (1999).

[9] Po-Yi Chang, Surface Profile Measurement by Using Fringe Projection and Fringe Reflection Methods, Mechanical Engineering National Cheng Kung University, (2005).

[10] Tsung-Hsun Chiang, Using Different Image Processing Techniques in the Development of a Thermal Deformation Measurement System for Electronic Packaging Applications, Yuan Ze University Department of Mechanical Engineering, (2004).

[11] I-Ting Tsai, The application of phase-evaluation methods and image processing on electronic packages, National Taiwan University Institute of Applied Mechanics, (2000).