Experimental Research on Load-Bearing Capacity of Frame Columns with Construction Joint under Low-Cyclic Reversed Loading

Xi Kang Yan; Cheng Dong; Pei Chen; Kang Ma

doi:10.4028/www.scientific.net/AMM.351-352.363

Paper Titles

Spectral Characteristics and Correlation of Dynamic Wind Loads of a Typical Super-Tall Building
p.347

Finite Element Analysis of Reinforced Concrete Beam-Column Joint under Low Cyclic Loading with Different Load Systems
p.351

Study on Mechanical Property of Reinforced Concrete (RC) Beams under Sea Water
p.355

Study on Ductility Performance of T-Shaped Section Steel Reinforced Concrete Columns
p.359

Experimental Research on Load-Bearing Capacity of Frame Columns with Construction Joint under Low-Cyclic Reversed Loading
p.363

Study on Mechanical Behavior of Steel Plate Support with Oval Bolt Hole in Space Frame Structure under Combined Action of Shear Force and Tensile Force
p.367

Three-Dimensional Dynamic Analysis on Soil-Structure Applying Mixed Linear-Nonlinear Substructure Method
p.372

Study on Plastic Hinge Length and Limit Curvature of RC Column
p.378

Seismic Strengthening of Masonry School Building with Steel Mesh Mortar Splint
p.382

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 351-352Experimental Research on Load-Bearing Capacity of...

Experimental Research on Load-Bearing Capacity of Frame Columns with Construction Joint under Low-Cyclic Reversed Loading

Abstract:

In this paper,in order to study the load-bearing capacity of frame columns with construction joint under low-cyclic reversed loading, nine specimens were made, divided into three groups.Every group had three specimens, the first were made without construction joint, the second had fine processing construction joint, the third had simple processing construction joint. The three groups were loaded in axial compression ratio of 0.23,0.34,0.46 respectively.The results show that the influence of different processing with construction joint to crack position ultimate bearing capacity,skeleton curves.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 351-352)

Pages:

363-366

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.351-352.363

Citation:

Cite this paper

Online since:

August 2013

Authors:

Xi Kang Yan*, Cheng Dong, Pei Chen, Kang Ma

Keywords:

Construction Joint, Crack, Experimental Study, Frame Column, Ultimate Load

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] Xan Yan, Pengchao Zhao. Earthquake Damage Analysis for Rural Buildings after 5. 12 and Relevant Countermeasures. Journal of water conservancy and architectural engineering, 2010, 8 (1): 160-163, in Chinese.

Google Scholar

[2] Liping Wang, Yingmin Li, Nina Zheng, Liping Liu, Jun Han, Jianwei Liu. Seismic damage investigation on typical slope building in 5. 12 wenchuan Earthquake. Science and technology journal of Xian building university (natural science edition), 2009, 41 (6) : 822-826, in Chinese.

Google Scholar

[3] Weijian Yi. Test for the design of building structures,. China building industry press, 2005, 7, in Chinese.

Google Scholar

[4] JGJ 101-96 Specificating of Testing Methods for Earthquake Resistant Building, in Chinese.

Google Scholar

[5] Chen Yuanfeng, Wang Zhengbo, Yang Chunhe. Experimental research on Seismic performance of frame with construction joint under low-cyclic reversed loading [J], in Chinese.

Google Scholar