Analysis on the Indoor Temperature in Households of Heating Metering with Work Mode

Cai Ling Chen; Chun Hua Sun; Guo Qiang Xia; Hua Yang; Cheng Ying Qi

doi:10.4028/www.scientific.net/AMM.353-356.3120

Paper Titles

The Experimental Study on Fresnel Lenses Concentrator Solar Cell Cooling by a Novel Micro Flat Plate Heat Pipe
p.3101

The Impact of Double Skin Facade on Building Energy Consumption in Daylighting Control Mode
p.3105

The Research on Influence of Different Forms of Window on Indoor Natural Ventilation in Residential Building
p.3109

Experimental Research on the Parameter Optimization of a Radiant Floor Heating System with Reflective Modules
p.3114

Analysis on the Indoor Temperature in Households of Heating Metering with Work Mode
p.3120

Ecotect-Based Light Environment Simulation for Supporting House Design
p.3125

Passive Ventilation Cooling Strategies on Modern Architecture
p.3133

Research and Development of the Terminal Heating Machine under the Mode of Central Heating
p.3137

The Design of New Technology System in the Intelligent Building’s Lighting
p.3141

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 353-356Analysis on the Indoor Temperature in Households...

Analysis on the Indoor Temperature in Households of Heating Metering with Work Mode

Abstract:

Based on the theory of the room heat balance ,this paper discussed the 24 hours indoor temperature with work mode ,and concluded that indoor temperature changed in three stages:steady period, cooling period and warming period .By testing the actual indoor temperature of different heating ways with work mode and comparing the cooling process of theory results with field measurements after the temperature control valve closed ,concluded that the theory results and field measurements were basically the same and if the temperature control valve was closed less than ten hours in the daytime, the largest reduction of indoor temperature were about 2 ~ 3 °C, and it wont reduce people's comfort with work mode when indoor or outdoor temperature was high.

You might also be interested in these eBooks

Advances in Civil and Industrial Engineering

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 353-356)

Pages:

3120-3124

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.353-356.3120

Citation:

Cite this paper

Online since:

August 2013

Authors:

Cai Ling Chen, Chun Hua Sun, Guo Qiang Xia, Hua Yang, Cheng Ying Qi

Keywords:

Household Metering, Indoor Temperature Rule, Work Mode

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Bing Hong Yan. Study on the effect of behavior energy-saving on the heating load characteristics of central heating system[D]. Tianjin: Hebei university of technology, (2011).

Google Scholar

[2] Ping He, Fei Wang. Heat-supply engineering[M]. Beijing: China building industry press, (2009).

Google Scholar

[3] Standard quota research institute of ministry of construction. GB50736-2012. Civil building heating ventilation and air conditioning design specification[S]. Beijing. China Planning Press, (2012).

Google Scholar

[4] TaiWenZhan, PingHuaZou. Heated room cooling and heating network discontinuity (or limits) heating[J]. District heating, 1995(6): 13-9.

Google Scholar

[5] Michele vio. Comparison of the radiator heating and floor heating[M]. Beijing: Higher education press, (2010).

Google Scholar

[6] YingDong. Test and performance study of low-temperature floor radiant heating system[D]. Tianjin: Tianjin university.

Google Scholar