Filtration and Pulse Cleaning System for Particle Removal from Gas

Abstract:

The application of rigid ceramic filter for gas filtration on an industrial scale has shown unstable operation over periods of days. The behavior of the ceramic filtration in further application can be predict by measuring properties of a variety of dust and filtration operation condition. The aim of the experimental investigation is to analysis the pressure distribution inside and outside the ceramic filter along the filter length, and to analyze the pressure drop across the filter along the filter length. Ceramic filter filtration system composes multi-pipe filters for gas clean up is introduced. The operation parameters can be measured by this test system, such as the pressure in the filter cavity and outside the filter surface, velocity outside the filter, gas temperature and humidity, flow rate, dust particle size concentration before gad entering the filter tank and after the gas leaving the filer tank, the pulse cleaning pressure.

• Periodical: Applied Mechanics and Materials (Volume 42)
• Pages: 188-191
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.42.188
• Online since: November 2010
• Authors: Hai Xia Li, Zhi Jun Sun, Li Jun Zhao, Zhan Xu Tie
• Keywords: Ceramic Filter, Gas Filtration, Pulse Cleaning, Separation

References

[1] Z. Ji, M. Shi: Transient flow analysis of pulse-jet generating system in ceramic filter. Powder Technology, 2004, 139: 200-207.

DOI: 10.1016/j.powtec.2003.11.004

[2] J. Choi, Ha S: Compression properties of dust cake of fine fly ashes from a fluidized bed coal combustor on a ceramic filter. Powder Technology, 2004, 140: 106-115.

DOI: 10.1016/j.powtec.2003.10.017

[3] A. Goodarz,H. Duane: Particle transport and deposition in a hot-gas cleanup pilot plant. Aerosol Science and Technology, 1998, 29: 183-205.

DOI: 10.1080/02786829808965563

[4] A. Goodarz,H. Duane: Analysis of steady-state filtration and back pulse process in a hot-gas filter vessel. Aerosol Science and Technology, 2002, 36: 665-677.

DOI: 10.1080/02786820290038357

[5] H. Li,Z. Ji,X. Wu and J. Choi: Numerical analysis of flow field in the hot gas filter vessel during the pulse cleaning process. Powder Technology, 2007, 173: 82~92.

DOI: 10.1016/j.powtec.2006.10.042

[6] H. Jiao,Z. Ji: Influence of operating parameters on pulse cleaning process of ceramic filter. Journal of Chemical Industry and Engineering, 2004, 55: 1156-1161.

[7] D. Koch,J. Sevile: Dust cake detachment from gas filters. Powder Technology, 1996，86: 21-29.

[8] X. Zhang,H. Li: Compressible gas flow in porous media/fluid coupled areas. Journal of Chemical Industry and Engineering, 2003, 24: 1209-1214.