Thermal Fluid-Solid Coupling Numerical Simulation in Ultra-Supercritical Steam Trap

Abstract:

Aiming at the strength destruction of high temperature and high pressure valve in the normal condition, an ultra-supercritical steam trap was taken as the research object, the fluid-solid-heat coupling simulation was carried, and the distributions of the fluid pressure and velocity were obtained, the distributions of the whole valve temperature field, the stress and deformation were also obtained. The results show that the valve will not produce cavitation after the depressurizing of multilevel sleeve step by step, and the flow rate is controlled; the maximum stress is found on the connection of the upper sleeve and the gland, the thermal stress values on the import and export of the valve are larger, and according to the stress classification and assessing criterion, they all meet the requirements of strength. It can provide reference for the design and optimization of the high temperature and high pressure valve.

• Periodical: Applied Mechanics and Materials (Volume 470)
• Pages: 255-258
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.470.255
• Online since: December 2013
• Authors: Shu Xun Li, Qiang Wei Ding*, Jian Hua Hu
• Keywords: Fluid Solid Coupling, Numerical Simulation, Steam Trap, Thermal Stress

References

[1] SHANG Cuixia, WANG Yong and XIE Yudong, in: The fluid-structure interaction features of control valve, volume 38 of Journal of Shangdong University (Engineering Science), chapter, 6(2008), p.11.

[2] TIJSSELING A S, VARDY A E, in: Water hammer with fluid-structure interaction in thick-walled pipes, volume 85 of Computers & Structures, chapter, 11(2007), p.844.

DOI: 10.1016/j.compstruc.2007.01.008

[3] R.D. Firouz-Abadi, M.A. Noorian and H. Haddadpour, in: A fluid-structure interaction model for stability analysis of shells conveying fluid, volume 26 of Journal of Fluids and Structures(2010), p.747.

DOI: 10.1016/j.jfluidstructs.2010.04.003

[4] TIJSSELING A S, VARDY A E, in: Fluid-structure interaction and transient cavitation tests in a T-piece pipe, volume 20 of Journal of Fluids and Structures, chapter, 6(2005), p.753.

DOI: 10.1016/j.jfluidstructs.2005.01.003

[5] LIU Jianrui, LI Chang and LIU Lianglian, in: Fluid-soild-heat Coupling Analysis for High-temperature and High-pressure Nuclear Power Gate Valve, volume 40 of Fluid Machinery, chapter, 3(2012), p.16.

[6] Tao Wenquan: Heat Transfer Theory (Northwestern Polytechnical University Press, Xi'an 2006).

[7] Shuxun Li, Jianhua Hu and Liancui Li, in: Stress analysis of ultra-supercritical and electrical three-way valve body intensity in a high pressure heater using FEM, volume 605 of Advanced Materials Research(2013), p.784.

DOI: 10.4028/www.scientific.net/amr.605-607.784

[8] ASME，Boiler and Pressure Vessel Code Section Ⅷ，Rules for Construction of Pressure Vessels, Division 2 Alternative Rules.

DOI: 10.1115/1.859872.ch23