Catalytic Cracking of Cornus wisoniana Oil to Liquid Bio-Fuel Oil Using KF/CaO as a Solid Base Catalyst

Abstract:

In this study, catalytic cracking of Cornus wisoniana oil to liquid bio-fuel oil using KF/CaO as a solid base catalyst was studied. The catalyst characteristic by SEM, XRD, CO₂-TPD was proposed and the separate effects of impregnation ratio, calcination temperature and calcination time were investigated. This paper also studied the separate influence of mass of catalyst and reaction time on catalytic cracking of Cornus wisoniana oil. The experimental results showed that a 41.7% impregnation ratio, 630°C calcination temperature, and 4h reaction time can obtain option catalyst. When addition of 0.1% KF/CaO catalyst and 35min reaction time gave the best results, and the liquid oil yield exceeded 82.7%. The catalyst basicity was not too high, formed flake porous layer structure.* Corresponding authors:Changzhu Li ([e-mail])

• Periodical: Applied Mechanics and Materials (Volumes 477-478)
• Pages: 1446-1451
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.477-478.1446
• Online since: December 2013
• Authors: Zhi Hong Xiao, Wei Wei Jiang, Lin Lin, Saritporn Vittayapadung, Ai Hua Zhang, Chang Zhu Li*
• Keywords: Catalytic Cracking, Cornus wisoniana Oil, KF/CaO, Liquid Bio-Fuel Oil

References

[1] Man Kee Lam et al. Biotechnology Advances, 2010, 28: 500-518.

[2] Vicent G, Coteron A, Martinez M, Aracil J. Indus Crop Prod, 1998, 8: 29–35.

[3] Ma F, Hanna MA. Bioresour Technol, 1999, 70: 1–5.

[4] Vicente G, Martinez M, Aracil J. Bioresour Technol, 2004, 92: 297–305.

[5] Ebiura T, Echizen T, Ishikawa A, Murai K, Baba T. Appl Catal A, 2005, 283: 111–115.

[6] Hak JK, Bo SK, Min JK, Young MP. Catal Today, 2004, 93: 315–20.

[7] Dorado MP, Ballesteros E, Lopez FJ, Mittelbach M. Energy Fuels, 2004, 18: 77–83.

[8] D. Stošic´ , S. Bennici, J. -L. Couturier, J. -L. Dubois, A. Auroux. Catal Comm, 2012, 17: 23–28.

[9] J. Hayashi, T. Nakahara, K. Kusakabe, S. Morooka. Fuel Process Technol, 1998, 55: 265–275.

[10] J. Sakata. Fuel Energy Abstr, 1997, 38: 81–181.

[11] J. Aguado, L. Sotelo, D. Serrano, J. Calles, J. Escola. Energy Fuels, 1997, 11: 1225–1231.

[12] J. Aguado, D. Serrano, J. Escola. Catal. Today, 2002, 75: 257–262.

[13] M. Uddin, Y. Sakata, A. Muto, Y. Shiraga, K. Koizumi, Y. Kanada, K. Murata. Micropor. Mesopor. Mater, 1998, 21: 557–564.

DOI: 10.1016/s1387-1811(98)00036-5

[14] S. Chaianansutcharit, R. Katsutath, A. Chaisuwan, T. Bhaskar, A. Nigo, A. Muto, Y. Sakata. J. Anal. Appl. Pyrol., 2007, 80: 360–368.

DOI: 10.1016/j.jaap.2007.04.009