Experimental Verification of the Properties of Fibres for the Mechanisms Based on Parallel Kinematic Structures

Abstract:

The paper was written in the framework of research in mechanisms of the increased mobility on the basis of parallel kinematic structures, for which a fibre control instead of rigid elements is designed. The experiment is focused on the verification of the fibre properties in simplified mechanical systems such as motion on an inclined plane, vibration of a moving weight hanging on a fibre and fibre interaction with two types of pulley. The arrangement and instrumentation of the experimental stand and of the system for the measurement of position and axial forces in a fibre are described. The results should serve for tuning the computational model, the results of which are also presented in the framework of specific experiments.

• Periodical: Applied Mechanics and Materials (Volume 486)
• Pages: 195-200
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.486.195
• Online since: December 2013
• Authors: Jaroslav Václavík*, Pavel Polach
• Keywords: Experiment, Fiber, Parallel Kinematic Structure, Verification of Computational Model

References

[1] P. Polach, J. Václavík, M. Hajžman, Load of fibres driving an inverted pendulum system, in: M. Růžička, K. Doubrava, Z. Horák (Eds. ), Proceedings of 50th Annual international conference on Experimental Stress Analysis, Czech Technical University in Prague, Tábor, 2012, pp.337-344.

[2] P. Maißer et al., alaska, User Manual, Version 2. 3, Institute of Mechatronics, Chemnitz, (1998).

[3] P. Polach, M. Hajžman, J. Václavík, Simple fibre-mass model and experimental investigation, in: L. Pešek (Ed. ), Proceedings of National Colloquium with International Participation Dynamics of Machines 2013, Institute of Thermomechanics AS CR, Prague, 2013, pp.79-84.

[4] M. Hajžman, P. Polach, J. Václavík, J. Mrštík, Utilization of ANCF for the modelling of a simple fibre-mass system, in: L. Pešek (Ed. ), Proceedings of National Colloquium with International Participation Dynamics of Machines 2013, Institute of Thermomechanics AS CR, Prague, 2013, pp.19-24.

[5] P. Polach, M. Hajžman, J. Václavík, Experimental and Computational Investigation of a Simple Fibre-mass System, in: I. Zolotarev (Ed. ), Proceedings of 19th International Conference Engineering Mechanics 2013, Institute of Thermomechanics AS CR, Svratka, 2013, CD-ROM.

[6] P. Polach, M. Hajžman, J. Václavík, Z. Šika, P. Svatoš, Model parameters influence of a simple mechanical system with fibre and pulley with respect to experimental measurements, in: Z. Terze (Ed. ), Proceedings of ECCOMAS Thematic Conference Multibody Dynamics 2013, University of Zagreb, Zagreb, 2013, CD-ROM.

DOI: 10.1007/978-3-030-23132-3_28