The Cement Paste Creep with Addition of Fly Ash in Time and Ratio of Parts 60/40

Pavel Padevět; Petr Bittnar

doi:10.4028/www.scientific.net/AMM.486.341

Paper Titles

Influence of Water Content in the Hardened Cement Paste Mixtures with Different Proportion of Fly Ash on the Material and Mechanical Properties
p.319

Utilization of Recycled Fine-Ground Concrete from Railway Sleepers for Production of Cement-Based Binder
p.323

Influence of Humidity on the Material Properties of Cement Paste with Fly Ash in the Mutual Relation 50/50
p.327

Experimental Testing of a Bridge
p.333

The Cement Paste Creep with Addition of Fly Ash in Time and Ratio of Parts 60/40
p.341

Interpretation of Results of Penetration Tests Performed on Timber Structures in Bending
p.347

Influence of Freeze-Thaw Cycles on Mechanical Properties of Gypsum Determined Using the Impulse Excitation Method
p.353

A Modified Strip Method to Speed up the Calculation of Normal Stress between Wheel and Rail
p.359

A Modified Strip Method to Speed up the Tangential Stress between Wheel and Rail Calculation
p.371

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 486The Cement Paste Creep with Addition of Fly Ash in...

The Cement Paste Creep with Addition of Fly Ash in Time and Ratio of Parts 60/40

Abstract:

The article solves the comparing of the resize of cement paste creep with addition of fly ash in time. Creep was observed in the one monthly measurement for 4 and 10 months. The cement paste was prepared with fly ash in the ratio of the components 60/40 in favor of the cement components. Development of basic creep and creep was observed in water-saturated material. The measurement results are used as input data for the simulation of creep by the mathematical model and determine the values of the creep coefficient of cement paste. Results and comparison of q coefficients are presented.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 486)

Pages:

341-346

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.486.341

Citation:

Cite this paper

Online since:

December 2013

Authors:

Pavel Padevět*, Petr Bittnar

Keywords:

Basic Creep, Cement Paste, Saturated Cement Paste, Shrinkage, Strength in Compression

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] http: /www. cez. cz/cs/odpovedna-firma/zivotni-prostredi/programy-snizovani-zateze-zp/vyuziti-vedlejsich-produktu-uhelnych-elektraren. html, Information about secondary energy products.

Google Scholar

[2] T. Plachý, M. Polák, P. Tesárek: Evolution of Dynamic Young's Modulus of Grey Gypsum in Time, Proceedings of the 50th Annual Conference on Experimental Stress Analysis, pp.333-336, Tábor, Czech Republic, (2012).

Google Scholar

[3] A. M. Neville: Properties of Concrete, John Wiley & Sons, (1997), ISBN 0-470-23527-6.

Google Scholar

[4] O. Zobal, P. Padevět: Mechanical Properties of Cement Paste with Various Content of Fly Ash after 6 Months, Engineering Mechanics 2012, Svratka, Czech Repulic, p.396 / 397, ISBN 978-80-86246-39-0.

Google Scholar

[5] P. Padevět, O. Zobal: Change of Material Properties of the Cement Paste CEM I, in Proceedings of the 48th International Scientific Conference on Experimental Stress Analysis, Velké Losiny, May – June 2010, pp.307-310, ISBN 978-80-244-2533-7.

Google Scholar

[6] P. Padevět, P. Bittnar: Measuring of Creep of Cement Paste Specimen, Proceedings of the 2nd WSEAS International Conference on Applied Mathematics, Simulation, Modeling (ASM'09), Athens, Greece, 2009, pp.33-39.

Google Scholar

[7] B. Patzák: OOFEM project home page, http: /www. oofem. org, (2000).

Google Scholar

[8] Z. P. Bažant, S. Baweja: Creep and Shrinkage Prediction Model for Analysis and Design of Concrete Structure – Model B3, Materials and Structures, Vol. 28, pp.357-365, (1995).

DOI: 10.1007/bf02473152

Google Scholar