Reactive Mixing Behavior of the Nitration of Glycerin in a Stirred Vessel at Various Perturbation

Article Preview

Abstract:

Mixing processes are best understood in turbulent flows, where, ironically they are only understood in a statistical sense. Similarly, detailed analysis of the mechanisms of the realistic mixing process in deterministic laminar flows is nearly absent from literature. This experiment was implemented to investigate the comparable performance of reactive mixing at various perturbation; including continuous, periodic and chaotic. The experiment was designed to reveal the effects of perturbations on glycerin dissolution in nitric acid in stirred vessel. The ratio of glycerin (C3H5 (OH)3) to nitric acid (HNO3) is 1 : 3. The geometrical parameter was set to R1/R2 = 37.5/7, and an eccentricity of ε = 18.75 mm. The mixing time for dissolving fixed amounts of glycerin in fixed amounts of nitric acid was measured and compared to those from several different perturbations. It was found that mixing time for the exothermic reaction of glycerin nitration had been influenced by perturbations applied to fluid mixing. Comparable experiments have shown that mixing time in the glycerin-nitration reaction could be changed dramatically, along with various perturbations. This experiment results explicitly demonstrate the benefits of mixing performance from chaotic perturbations.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

221-226

Citation:

Online since:

January 2014

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2014 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

[1] G. S. Biasutti. History of Accidents in the Explosive Industry. Switzerland. (1985).

Google Scholar

[2] Badger Army Ammunition Plant in Sauk County, Wisconsin, USA. Explosive Decontamination and Demolition Process Information. Plexus Scientific Corporation. (2002).

Google Scholar

[3] K. T. Lu, P. C. Lin. Study on the stability of Nitroglycerine spent acid, process, safety, and environmental protection,. 2009. 87-93.

DOI: 10.1016/j.psep.2008.08.004

Google Scholar

[4] M.M. Alvarez-Hernandez, T. Sinbrot, J. Zalc, F. J Muzzio. Practical Chaotic Mixing,. Chemical Engineering Science, 57: 3749-3753, Elsevier. (2002).

DOI: 10.1016/s0009-2509(02)00265-8

Google Scholar

[5] Aref, H. Order in Chaos, Nature, Vol. 401. (1999).

Google Scholar

[6] O. Byrde, M.L. Sawley. Gaining Insights In to Fluid Mixing Via Massivelly Parallel Flow Computations,. Fluid Mechanics Laboratory, Ecole Polytechnique federale de lausanne, Switzerland. 1998. (http: /imhefwww. epfl. ch/lmf/publication/html/byrd972/. ).

DOI: 10.3940/rina.innovsail.2010.14

Google Scholar

[7] O.S. Galaktionov. Optimization of Kenics Static Mixers,. Department of Mechanical Engineering, Eindhoven University of Technology, Netherlands. (2001).

Google Scholar

[8] S.A. Jaffer, E.P. Wood. Quantification of Laminar Mixing in the Kenics Static Mixer: An Experimental Study,. Canadian Journal of Chemical Engineering Abstracts, Vol. 76. (1998).

DOI: 10.1002/cjce.5450760323

Google Scholar

[9] Moon, F.C. Chaotic and Fractal Dynamics, John Wiley & Sons, Inc., United Stated of America. (1992).

Google Scholar

[10] L.K.H. Osenbroch, B.H. Hjertager, T. Solberg. Experiments and CFD Modeling of Fast Chemical Reaction in Turbulent Liquid Flows,. International Journal of Chemical Reactor Engineering. (2005).

DOI: 10.2202/1542-6580.1251

Google Scholar

[11] Soucek, Blanko. Dynamic, Genetic, and Chaotic Programming, The Sixth Generation, John Wiley and Sons, Inc., New York. (1992).

Google Scholar

[12] Stroock, Dertinger, Ajdari, Mezic, Stone, Whitesides. Chaotic Mixer For Micro Channels, Science Vol. 295: 647-651. (2002).

DOI: 10.1126/science.1066238

Google Scholar

[13] Szalai, Muzzio, Bittorf. Validation of the ORCA CFD Software Using SMX and Kenics Static Mixer Elements,. Department of Chemical and Biochemical Eng., Rutgers University, NJ. (2002).

Google Scholar

[14] J.L. Thiffeault. A Reduced Advection-Diffusion in Chaotic Mixing, Department of Applied Physics and Applied Mathematics, Columbia University, New York. (2001).

Google Scholar

[15] Ueda, T. Introduction to Reactive Fluid Dynamics, School of Science for Open and Environment Systems, Keio University, Japan. (http: /www. soi. wide. ad. jp/class/20030000/material_for_student/02/20030429ueda. pdf). (2003).

Google Scholar

[16] Zhong Zhang, Guanrong Chen. Liquid Mixing Enhancement by Chaotic Perturbations in Stirred Tank,. (2006).

Google Scholar

[17] Sanjeeva Balasuriya, Optimal Perturbation for Enhanced Chaotic Transport, Physica D 202 155-176, Elseiver. (2005).

DOI: 10.1016/j.physd.2004.11.018

Google Scholar

[18] C.W. Lipp, P.A. Gillis, R.D. Spradling, K. Tsai, L.A. Melton, Measurement of Reactive Mixing of Liquids with Combined PIV and Reactive PLIF Methodology,. Process Mixing Group-Corporate Research and Development, The Dow Chemical Company Freeport and Department of Chemistry University of Texas.

Google Scholar

[19] Song Guo, Qingsong Wang, Jinhua Sun, Xin Liao, Ze-shan Wang, Study on the influence of moisture content on thermal stability of propellant, Journals of Hazardous Materials: 536-541. (2009).

DOI: 10.1016/j.jhazmat.2009.02.073

Google Scholar

[20] Katsumi Katoh, Masaru Nakahama, Shuhei Kawaguchi, Yuji Wada, Yuji Ogata, Mitsuru Arai. The effect of conventional stabilizer and phenolic antioxidants on the thermal stability of Nitroglycerine,. Sci. Tech. Energetic Materials, Vol. 71, No. 1, pp.17-22. (2010).

Google Scholar

[21] A. K. Sharma, A. S. Sharma, Fluid Motion. New Delhi: Discovery Publishing House PVT. LTD., 2008, pp.1-8.

Google Scholar

[22] Noel de Nevers, Fluid Mechanics for Chemical Engineers. 3rd ed. Singapore: McGraw-Hill, 2005, pp.560-569.

Google Scholar

[23] James Y. Oldshue. Fluid Mixing Technology. New York: McGraw-Hill, 1983, pp.216-229.

Google Scholar

[24] J. M. Haile. Molecular Dynamics Simulation. Canada: John Wiley & Sons, 1992, pp.43-53.

Google Scholar

[25] Guy Metcalfe, Daniel Lester. Mixing and heat transfer of highly viscous products with a continuous chaotic duct flow,. Journal od Food Engineering 95, 21-29. (2009).

DOI: 10.1016/j.jfoodeng.2009.04.032

Google Scholar

[26] Kamal El Omari, Yves Le Guer. Alternate rotating walls for thermal chaotic mixing,. Journal of Heat and Mass Transfer, 1-26. (2009).

DOI: 10.1016/j.ijheatmasstransfer.2009.09.046

Google Scholar

[27] Gabriel Ascanio, Stephane Foucault, Mourad Heniche, Christian Rivera, Phillippe A. Tanguy. Chaotic Mixing in Stirred Vessel: a New Strategy to Enhancement a Homogeneity,. Ingenieria Mecanica, Tecnologia y Dessarrollo, marzo, ano/vol. 1, numero 006, Distrito federal, Mexico, pp.209-214. (2005).

Google Scholar

[28] Yoshinori Mizuno, Mitsuaki Funakoshi. Chaotic Mixing due to spatially periodic three-dimensional flow,. Fluids Dynamics Research 31, 129-149, Elsevier. (2002).

DOI: 10.1016/s0169-5983(02)00093-x

Google Scholar

[29] Mitsuaki Funakoshi. Chaotic Mixing and Mixing Efficiency in a Short Time,. Fluids Dynamics Research 40, 1-33, Elsevier. (2008).

DOI: 10.1016/j.fluiddyn.2007.04.004

Google Scholar

[30] A. Lefevre, J.P.B. Mota, A.J.S. Rodrigo, E. Saatdjian. Chaotic Advection and Heat Transfer Enhancement in Stokes Flows,. Int. Journal of Heat and Fluid Flow 24, 310-321. (2003).

DOI: 10.1016/s0142-727x(03)00022-5

Google Scholar

[31] K. Takahashi, M. Motoda. Chaotic Mixing Created by Object Inserted in a Vessel Agitated by an Impeller,. 13th European Conference on Mixing, London, 14-17 April (2009).

DOI: 10.1016/j.cherd.2009.01.003

Google Scholar