Empirical Correlations for Sizing Adiabatic Capillary Tube Using LPG as Refrigerant in Split-Type Air-Conditioner

Abstract:

This paper presents correlations for sizing adiabatic capillary tubes which serves as an expansion device in split-type air-conditioner with LPG, novel hydrocarbon (HC) mixtures of butane (HC600) and propane (HC290) as refrigerant. A homogenous two-phase flow model developed by the authors and also experimental investigation of the Liquified Petroluem Gas (LPG) refrigerant flow in adiabatic capillary tubes were used in this study. The theoretical model was used to assess various percentage compositions of these HC mixtures and validated with the experimental data. For each HC refrigerant mixture, correlations for sizing adiabatic capillary tube which contains the relevant factors, viz. capillary tube inner diameter, inlet pressure, refrigerant mass flow rate, capillary tube surface roughness and capillary tube inlet subcooling was developed. The proposed correlations were compared with the authors measured data and found to be in good agreement. Further validation was made by comparing the mass flow rates predictions of the correlations with experimental data of previous studies and found that these correlations are consistent. The correlations can be used in small vapour compression refrigeration systems working with the HC refrigerant mixtures for practical design and optimization.

• Periodical: Applied Mechanics and Materials (Volume 493)
• Pages: 99-104
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.493.99
• Online since: January 2014
• Authors: Shodiya Sulaimon, Azhar Abdul Aziz, Amer Nordin Darus, Henry Nasution
• Keywords: Capillary Tube, Empirical Correlation, Hydrocarbons, LPG, Split-Type Air-Conditioner

References

[1] D. Ibrahim, Refrigeration Systems and Application. The Atrium, Southern Gate, Chichester, West Sussex, England: John Wiley & sons, Ltd., (2003).

[2] M. M. El-Awad, Validation of a computerised analytical model for evaluating natural hydrocarbon mixtures as alternative refrigerants, Journal of Sutainable Energy & Environment 2 (2011) 175-179.

[3] M. Fatouh, Theoretical investigation of adiabatic capillary tubes working with propane/n-butane/iso-butane blends, Energy Conversion and Management 48 (2007) 1338–1348.

DOI: 10.1016/j.enconman.2006.07.003

[4] R. Kumar, M. K. Khan,P. K. Sahoo, An experimental study of the flow of R-134a inside an adiabatic spirally coiled capillary tube, International Journal of Refrigeration 31 (2008) 970–978.

DOI: 10.1016/j.ijrefrig.2008.01.008

[5] R. Kumar, M. K. Mittal,A. Gupta, An experimental study of the flow of R-407C in an adiabatic helical capillary tube, International Journal of Refrigeration 33 (2010) 840–847.

DOI: 10.1016/j.ijrefrig.2009.12.022

[6] S. Shodiya, A. A. Azhar, N. Henry,A. N. Darus, New Empirical Correlations for Sizing Adiabatic Capillary Tubes in Refrigeration Systems, American Institute of Physics Conference Proceedings 1440 (2012) 341-355.

DOI: 10.1063/1.4704235

[7] Anon, Montreal protocol on substances that deplete the ozone layer, ed. United Nations Environment Programme (UNEP): UNEP, (1987).

DOI: 10.4337/9781845428297.00072

[8] W. J. Yoon, K. Seo, H. J. Chung,Y. Kim, Performance optimization of dual-loop cycles using R-600a and hydrocarbon mixtures designed for a domestic refrigerator-freezer, Int. J. Refrig. 35 (2012) 1657-1667.

DOI: 10.1016/j.ijrefrig.2012.04.019

[9] S. Devotta, A. S. Padalkar,N. K. Sane, Performance assessment of HC-290 as a drop-in substitute to HCFC-22 in a window air conditioner, Int. J. Refrigeration 28 (2005) 594-604.

DOI: 10.1016/j.ijrefrig.2004.09.013

[10] M. Fatouh,M. El Kafafy, Assessment of propane/commercial butane mixtures as possible alternatives to R134a in domestic refrigerators, Energy Conversion and Management 47 (2006) 2644–2658.

DOI: 10.1016/j.enconman.2005.10.018

[11] M. Y. Lee, D. Y. Lee,Y. Kim, Performance characteristics of a small-capacity directly cooled refrigerator using R290/R600a (55/45), Int. J. Refrig. 31 (2008) 734-741.

DOI: 10.1016/j.ijrefrig.2007.11.014

[12] K. J. Park,D. Jung, Performance of R290 and R1270 for R22 applications with evaporator and condenser temperature variation, J. Mech. Sci. Technol. 22 (2008) 532-537.

DOI: 10.1007/s12206-007-1028-3

[13] K. J. Park, Y. Lee,D. Jung, Performance of R170/R1270 mixture under air-conditioning and heat pumping conditions., J. Mech. Sci. Technol. 24 (2010) 879-885.

DOI: 10.1007/s12206-010-0205-y

[14] S. Shodiya, A. A. Azhar, H. Nasution,A. N. Darus, R22 and Various Mixtures of R290/R600a as its Alternative in Adiabatic capillary tube Used in split-type Air-conditioning System, in The 5th International Meetings on Advances in Thermo-fluids (IMAT), Bintan island - Indonesia, 2012, pp.61-66.

[15] M. Mohanraj, S. Jayaraj, C. Muraleedharan,P. Chandrasekar, Experimental investigation of R290/R600a mixture as an alternative to R134a in a domestic refrigerator, Int. J. Thermal Sci. 48 (2009) 1036–1042.

DOI: 10.1016/j.ijthermalsci.2008.08.001

[16] H. Nasution, Energy Efficiency on Split-Type Air Conditioning System Using Hydrocarbon Mixtures As Drop-In Replacement For R-22, The 3rd International Conference on Construction Industry Padang - Indonesia (2012) 1-10.

[17] S. Wongwises,N. Chimres, Experimental study of hydrocarbon mixtures to replace HCF-134a in a domestic refrigerator, Energy Conversion and Management 46 (2005) 85-100.

DOI: 10.1016/j.enconman.2004.02.011

[18] S. Wongwises, A. Kamboon,B. Orachon, Experimental investigation of hydrocarbon mixtures to replace HFC-134a in an automotive air conditioning system, Energy Conversion and Management 47 (2006) 1644–1659.

DOI: 10.1016/j.enconman.2005.04.013

[19] B. A. Akash,S. A. Said, Assessment of LPG as a possible alternative to R-12 in a domestic refrigerator, Energy Conversion Management 44 (2003) 381-388.

DOI: 10.1016/s0196-8904(02)00065-1

[20] D. Jung, C. Kim, K. Song,B. Park, Testing of propane/isobutane mixture in domestic refrigerators, International Journal of Refrigeration 23 (2000) 517-527.

DOI: 10.1016/s0140-7007(99)00084-5

[21] D. M. Lal, S. J. Sekhar,S. Renganaraynan, Improved energy efficiency for CFC domestic refrigerators retrofitted with ozone friendly HFC134a/HC refrigerant mixture Int. J. Thermal Sci. 43 (2004) 307–314.

DOI: 10.1016/j.ijthermalsci.2003.08.002

[22] N. Henry, S. Shodiya, A. A. Azhar,N. A. Darus, Design and development of expansion device in refrigeration system using LPG as refrigerant, Project Report of "Research University Grant (GUP) Program : Tier 2 cost centre code: QJ130000. 7124. 01J85, Universiti Teknologi Malaysia (2012).

[23] N. Hashim, The Study of Combustion Characteristics for Different Composition of LPG, Bachelor of Chemical Engineering, Department of Chemical Engineering, Universiti Malaysia Pahang, Pahang, (2008).

DOI: 10.17485/ijst/2017/v10i6/111219

[24] www. gasmalaysia. com/why_GM/lpg_composition. php, LPG Composition and Characteristics, ed, (2012).

[25] R. W. Larsen, Engineering with Excel, 3rd ed. Upper Saddle River, New Jersey: Pearson Education, Inc., (2009).

[26] D. B. Jabaraj, A. Vettri Kathirvel,D. Mohan Lal, Flow characteristics of HFC407C/HC600a/HC290 refrigerant mixture in adiabatic capillary tubes, Applied Thermal Engineering 26 (2006) 1621–1628.

DOI: 10.1016/j.applthermaleng.2005.11.017