Dynamic Response Test of Reinforced Concrete Slab under Blast Loading

Abstract:

Reinforced concrete panels were tested explosion for reinforced concrete slab in the dynamic response under blast loading. Dimensions of 1300mm×1300mm×50mm plates under different reinforcement ratio were designed. Explosion test was carried out for three different batches of reinforcement ratio reinforced concrete slab in the explosion simulator. The load was calculated using empirical formulas. Blast loading time curve was obtained by the explosion test and the correctness of the numerical simulation method was verified. The results indicate that reinforced concrete slab under blast loading is different from static damage destruction. Diagonal cracks appear on plat under the blast loading destroyed. When the peak load is large, a large square cracks plate was appeared in the middle of the plate and accompanied diagonal cracks. When the peak load is small, diagonal cracks develop fully, square cracks were smaller.

• Periodical: Applied Mechanics and Materials (Volume 507)
• Pages: 291-294
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.507.291
• Online since: January 2014
• Authors: Zhi Zhong Li, De Gao Tang, Wei Wei Li, Zhi Fang Yan
• Keywords: Blast Loading, Dynamic Response, Experimental Research, Reinforced Concrete Slab

References

[1] Chinese National Standards. People basement design specifications(GB 50038-2005) [S]. Beijing: China Building Industry Press, 2005 (in Chinese).

[2] Zhaoyuan Cheng. Protection engineering reinforced concrete members shear behavior and design method(two). Protection Engineering, 1994, 1: 1-7 (in Chinese).

[3] Chinese National Standards. Test methods standard for concrete structures(GB 50152-92) [S]. Beijing: China Building Industry Press, 1992 (in Chinese).