Prospects of Use and Impact of Nanoparticles on the Properties of High-Strength Concrete

Abstract:

The basic properties of concrete can dramatically improve due to the unique structure of the nanosized particles. Namely, strength, frost resistance, fire resistance, corrosion resistance are increased, density and permeability are reduced; plasticity and water absorption are regulated. Despite of the huge number of advantages of nanomodified concrete, analysis of the use of nanoparticles shows that they are used quite seldom, as it requires a large cash outlay. It is not always profitable to use such additives. This article discusses some additives: magnesium nanoshpinel, microspheres, rice hull ash and metakaolin, astralenes, ferric hydroxide sol, carbon nanotubes, silica fume, nanosilica, MB-01, combined modifiers, based on iron hydroxide sol and silica sol. As well in this article sol-gel method as an additive in concrete is considered. The analysis shows that the use of nanosized particles can reduce a large amount of cement. As an addition, savings of the use are seen in reducing the cost of construction due to the low density with high strength. Accurate material consumption and maximum use of advantages of nanomodified concrete provide great prospects of implementation of this material in construction.

• Periodical: Applied Mechanics and Materials (Volumes 584-586)
• Pages: 1416-1424
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.584-586.1416
• Online since: July 2014
• Authors: Artem Frolov*, Ludmila Chumadova, Artemiy Cherkashin, Luka Akimov
• Keywords: Magnesium Nanoshpinel, MB-01, Metakaolin (MK), Microsilica, Microsphere, Nanomodified Concrete, Nanoscale Particles, Nanosilica, Rice Hull Ash, Sol-Gel

References

[1] Ponomarev A.N. Vysokokachestvennye betony. Analiz vozmozhnosteĭ i praktika ispol'zovanija metodov nanotehnologii (2009) Magazine of Civil Engineering, 8(6), pp.25-33.

[2] Kovaleva A. Yu., Belyayeva Zh. V., Aubakirova I. U, Staroverov V. D. Opyt promyshlennogo primeneniya nanomodifitsirovannykh betonnykh smesey (2008) Ves beton.

[3] Pukharenko Yu. V., Aubakirova I. U., Staroverov V. D., Gyunner T. V., Kudobayev M. K. Korrozionnostoykiye nanomodifitsirovannyye tsementnyye (2010) Tekhnologii betonov, 7(8), pp.24-27.

[4] Sprince, A., Pakrastinsh, L., Korjakins A. Experimental study on creep of new concrete mixtures (2011) Civil Engineering '11 - 3rd International Scientific Conference, Proceedings, Vol. 3, pp.20-26.

[5] Kishinevskaya Ye.V., Vatin N.I., Kuznetsov V.D. Perspektivy primeneniya nanobetona v monolitnykh bolsheproletnykh rebrestykh perekrytiyakh s postnapryazheniyem (2009) Magazine of Civil Engineering, 2, p.54–58.

[6] EN 1992 Eurocode 2. Design of concrete structures.

[7] Kolb D.A., Chumadova L.I. Perspektivy nanomodifikatsii (2011) Materialy NPKMU (XLI week of science of SPbGPU) Part 1, pp.14-16.

[8] Vauchskiy M.N. Nanobeton: mify i realnost (2007) Stroy PROFIl, № 8, p.48 – 50.

[9] Barabanshchikov Yu.G. Vasilyev. A.S. Effektivnost dobavok – uskoriteley skhvatyvaniya i tverdeniya dlya torkret-betona (2012) Magazine of Civil Engineering, 8(34), p.72–78.

[10] Ta Van Fan, Nesvetev G.V., Vliyaniye beloy sazhi i metakaolina na prochnost i deformatsionnyye svoystva tsementnogo kamnya (2012) Inzhenernyy vestnik Dona, № 4, Part 1.

[11] Nesvetayev G.V., Kardumyan G.S., Ta Van Fan, Khomich L.A., Blyagoz A.M. Kontraktsiya portlandtsementra v prisutstvii superplastifikatorov i mineralnykh (2012) Novyye tekhnologii, №4, pp.125-128.

[12] Nesvetayev G.V., Kardumyan G.S., Ta Van Fan, Khomich L.A., Blyagoz A.M. O vliyanii superplastifikatorov i mineralnykh dobavok na velichinu nachalnogo modulya uprugosti tsementnogo kamnya i betona (2012) Novyye tekhnologii, № 4, pp.118-121.

[13] Nesvetayev G.V., Kardumyan G.S., Ta Van Fan, Khomich L.A., Blyagoz A.M. O vliyanii superplastifikatorov i mineralnykh dobavok na poristost tsementnogo (2012) Novyye tekhnologii, № 4, pp.122-125.

[14] Ta Van Fan. Samouplotnyayushchiyesya vysokoprochnyye betony s kompensirovannoy usadkoy (2012) Materialy MNPK «Stroitelstvo 2012» RGSU, pp.124-126.

[15] Zaporozhec I.D., Parijskij A.A., Okorokov S.D., Chumadova L.I. K voprosu o temperaturnoj funkcii teplovydeleniya betona (1977) Beton i zhelezobeton, №6.

[16] Chumadov L.N., Chumadova L.I. Sovershenstvovanie metodov teplovoj obrabotki zhelezobetonny'x izdelij (1973) Stroitel'stvo i arxitektura Leningrada, №2.

[17] Matveyeva Ye. G. Povysheniye effektivnosti betona dobavkoy nanodispersnogo kremnezema (2011) M.: Belgorod. 2011. 21 p.

[18] Sprince, A. , Fischer, G, , Pakrastinsh, L., Korjakins, A. Crack propagation in concrete with silica particles (2012) Advanced Materials Research, Vol. 842, pp.470-476.

DOI: 10.4028/www.scientific.net/amr.842.470

[19] Sprince, A. , Korjakins, A. , Pakrastinsh, L. Time-dependent behavior of high performance fiber-reinforced concrete (2013) Advanced Materials Research, Vol. 705, pp.75-80.

DOI: 10.4028/www.scientific.net/amr.705.75

[20] Kapriyelov S.S. Batrakov V.G., Sheynfeld A.V. Modifitsirovannyye betony novogo pokoleniya: realnost i perspektiva (1999) Beton i zhelezobeton, № 6, p.6–10.

[21] Davaasenge S.S., Burenina O.N. Fiziko-mekhanicheskiye svoystva nanomodifitsirovannykh «toshchikh» betonov dlya ustroystva osnovaniy dorozhnoy odezhdy (2011) Scientific journal of KubGAU, 10(074), p.732 – 743.

[22] Inozemtsev A. S, Korolev Ye.V. Osnovy razrabotki nanomodifitsirovannykh vysokoprochnykh legkikh betonov (2013) Nanotekhnologii v stroitelstve, Vol. 23, №1.

[23] Yu, M.F.; Lourie, O., Dyer, M.J., Moloni, K., Kelly, T.F., Ruoff, R.S. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load (2000) Science 2000, Vol. 287, p.637–640.

DOI: 10.1126/science.287.5453.637

[24] Salvetat, J.P. Bonard, J. -M., Thomson, N.H.; Kulik, A.J., Forró, L., Benoit, W., Zuppiroli, L. Mechanical properties of carbon nanotubes (1999) Applied Physics A: Materials Science and Processing, Vol. 69, p.255–260.

DOI: 10.1007/s003390050999

[25] Walters, D.A., Ericson, L.M., Casavant, M.J., Liu, J., Colbert, D.T., Smith, K.A., Smalley R.E. Elastic strain of freely suspended single-wall carbon nanotube ropes (1999) Applied Physics Letters, Vol. 74, p.3803–3805.

DOI: 10.1063/1.124185

[26] Sinnott, S.B., Andrews, R. Carbon nanotubes: Synthesis, properties and applications (2001) Critical Reviews in Solid State and Materials Sciences, Vol. 26, p.145–249.

DOI: 10.1080/20014091104189

[27] Berber, S., Kwon, Y.K., Tomanek, D. Unusually high thermal conductivity of carbon nanotubes (2000) Physical Review Letters, Vol. 84, p.4613–4616.

DOI: 10.1103/physrevlett.84.4613

[28] Brozdnichenko A.N., Ponomarev A.N., Pronin V.P., Rybalko V.V. Magnetic properties of multiwall carbon nanotubes and astralenes in strong electric (2007).

DOI: 10.1134/s1027451007010223

[29] Ponomarev, A.N., Shames, A.I., Katz, E.A., Panich, A.M., Mogilyansky, D., Mogilko, E., Grinblat, J., Belousov, V.P. Structural and magnetic resonance study of astralen nanoparticles (2009) Diamond and Related Materials, №18 (2-3),  pp.505-510.

DOI: 10.1016/j.diamond.2008.10.056

[30] Ponomarev, A.N., Egorushkin, V.E., Melnikova, N.V. The role of structural inhomogeneities in the temperature behavior of the thermopower in metallized nanotubes with impurities (March 2009) Russian Physics Journal, Vol. 52, Issue 3, pp.252-264.

DOI: 10.1007/s11182-009-9223-6

[31] Ponomarev, A.N., Egorushkin, V.E., Melnikova, N.V., , Reshetnyak, A.A. Anomalous thermal conductivity in multiwalled carbon nanotubes with impurities and short-range order  (2010).

DOI: 10.1088/1742-6596/248/1/012005

[32] Ponomarev, A.N., Shames, A.I., Felner, I., Osipov, V. Yu., Katz, E.A. d, Mogilko, E., Grinblat, J., Panich, A.M., Belousov, V.P., Belousova, I.M. Closed π-electron network in large polyhedral multi-shell carbon nanoparticles (February 2011) Nanoscience and Nanotechnology Letters, Vol. 3, Issue 1, February 2011, pp.41-48.

DOI: 10.1166/nnl.2011.1117

[33] Kiski S.S., Ageev I.V., Ponomarev A.N., Kozeev A.A., Judovich M.E. Issledovanie vozmozhnosti modifikacii karbosilatnyh plastifikatorov v sostave modificirovannyh melkozernistyh betonnyh smesej (2012) Magazine of Civil Engineering, 34(8) pp.42-46.

[34] Vatin N.I., Petrosov D.V., Kalachev A.I., Lakhtinen P. Primeneniye zol i zoloshlakovykh otkhodov v stroitelstve (2011) Magazine of Civil Engineering, 4(22), p.16–21.

[35] Yudovich M. Ye. O nekotorykh osobennostyakh nanotekhnologii v plastifikaii (2008) Magazine of Civil Engineering, №1, pp.30-32.

[36] Photographer: JSC «Institut «Stroyproyekt.

[37] Information on: http: /saint-petersburg. ru/m/307416/ 20. 11. (2011).

[38] Frolov A.V., Kononov Yu.I. Ispolzovaniye nanobetona v stroitelstve unikalnykh zhelezobetonnykh konstruktsiy i sooruzheniy (2012) Materialy NPKMU (XLI week of science of SPbGPU) Part 1, pp.420-421.

[39] Pieter van Broekhuizen, Fleur van Broekhuizen, Ralf Cornelissen, Lucas Reijnders. Use of nanomaterials in the European construction industry and some occupational health aspects thereof (February 2011) Journal of Nanoparticle Research, Vol. 13, Issue 2, pp.447-462.

DOI: 10.1007/s11051-010-0195-9

[40] Cristina Buzea, Ivan I. Pacheco, Kevin Robbie. Nanomaterials and nanoparticles: Sources and toxicity (December 2007) Biointerphases, Vol. 2, Issue 4, pp. MR17-MR71.

DOI: 10.1116/1.2815690

[41] Harri Alenius, Julia Catalán, Hanna Lindberg, Hannu Norppa, Jaana Palomäki, Kai Savolainen. Chapter 3 - Nanomaterials and Human Health. (2014) Handbook of Nanosafety Pp. 59-133. @ Academic Press. (2014).

DOI: 10.1016/b978-0-12-416604-2.00003-2

[42] Pietroiusti A., Magrini A., Campagnolo L. 2 - Mechanisms of nanomaterial toxicity (2014) Health and Environmental Safety of Nanomaterials, pp.28-43. © Woodhead Publishing Limited. (2014).

DOI: 10.1533/9780857096678.1.28

[43] Jonathan D. Judy, Paul M. Bertsch. Chapter One - Bioavailability, Toxicity, and Fate of Manufactured Nanomaterials in Terrestrial Ecosystems (2014) Advances in Agronomy, Vol. 123, pp.1-64.

DOI: 10.1016/b978-0-12-420225-2.00001-7