Study on the Combustion Characteristic of Adhesive Polystyrene

Yan Fei Chen; Liang Yang; Shuang Zhuang

doi:10.4028/www.scientific.net/AMM.664.191

Paper Titles

Mathematical Simulation and Design Optimization of a Novel Swing Vane Compressor
p.163

Rotor-Dynamic Characteristic Evaluation of Generator Geothermal Power Plant Using Finite Element Method
p.170

Theoretical Analysis on the Ultimate Bearing Capacity for Steel Tubular Transmission Tower’s Joints with Annular Plate
p.175

A New Flow Safety Assessment Method for Direct-Heater Used in Heat Transportation of Waxy Crude Pipeline
p.185

Study on the Combustion Characteristic of Adhesive Polystyrene
p.191

Experimental Study on Downward Flame Spread of Rigid Polyurethane Foam with External Radiation
p.194

Effect of Sample Width on Downward Flame Spread over Typical Energy Conservation Material at a High Elevation Area
p.199

Fitness for Service Assessment of High Pressure Heater Tube at Coal Fired Power Plant
p.204

A Relationship between Flash Point and Boiling Point of the Flammable Liquids at Low Pressure
p.210

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 664Study on the Combustion Characteristic of Adhesive...

Study on the Combustion Characteristic of Adhesive Polystyrene

Abstract:

In this paper, two kinds of adhesive polystyrene with different proportions and one retardant polystyrene board were studied by test of non combustibility, calorific value and single combustion test. By analysis and comparison, on the premise of the roughly same cost and thermal conductivity, adhesive polystyrene materials showed much less fire risk than that of the polystyrene board.

You might also be interested in these eBooks

Mechatronics and Mechanical Engineering I

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 664)

Pages:

191-193

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.664.191

Citation:

Cite this paper

Online since:

October 2014

Authors:

Yan Fei Chen*, Liang Yang, Shuang Zhuang

Keywords:

Adhesive Polystyrene, Combustion Characteristic, Insulation board

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] S. Lifeng: Discussion on status and development of the exterior insulation, Sichuan Building Materials, Vol. 2 (2013), pp.12-13.

Google Scholar

[2] JG158 External thermal insulation rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggregate[S]. Beijing：Standard Press of China, (2004).

Google Scholar

[3] Features of the Exterior insulation system made of Adhesive Polystyrene，Sichuan Building Materials, 37 (161), (2011).

Google Scholar

[4] X. Bingfan, Application and Research on Building outer wall heat preservation technology [D]. Jilin University. (2006).

Google Scholar

[5] O. Yunxiang，L. Jianjun: Test method for flammability of materials［Ｍ］．Beijing：Chemical Industry Press，(2007), pp.110-111.

Google Scholar

[6] EN 13823： Reaction to fire tests for building products-Building products excluding floorings exposed to the thermal attack by a single burning item[S]. (2002).

DOI: 10.3403/02510394

Google Scholar