Research on Laser Oxidation Melting Cutting Process of Automobile Carbon Parts

Abstract:

This paper deals with the study of automobile parts laser cutting process and high power laser oxidation melting cutting technology. Laser oxidation melting cutting and perforation technology was studied and laser cutting process was established. Take automobile part back end plate for example, back end plate and the material is carbon steel, the CAD/CAM simulation software was used, reasonable processing parameters, cutting parameters and perforation parameters were designed. The experimental results show that laser oxidation cutting is very effective method for automobile parts of carbon steel. The laser oxidation laser cutting technical problems and carbon materials processing technology were solved and improvement measures were summarized for the high laser oxidation melting cutting.

• Periodical: Applied Mechanics and Materials (Volume 778)
• Pages: 159-163
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.778.159
• Online since: July 2015
• Authors: Hai Bing Xiao*
• Keywords: Carbon Steel Cutting, Cutting Technology, Laser Cutting, Oxidation Melting Cutting, Perforation Cutting

References

[1] Wang J: Experimental analysis and optimization of the CO2 laser cutting process for metallic coated sheet steels. International Journal of Advanced Manufacturing Technology, Vol. 16(2000), p.334.

DOI: 10.1007/s001700050165

[2] N. Rajaram, J. Sheikh-Ahmad and S.H. Cheraghi: CO2 laser cut quality of 4130 steel. International Journal of Machine Tools&Manufacture, Vol. 43(2003), p.351.

DOI: 10.1016/s0890-6955(02)00270-5

[3] Yan Qi and Liu Feng: Influence of technology parameters on the laser cutting quality. APPLIED LASER(2006).

[4] Ya-jun Chen: Studied on robot optical fiber laser cutting system for cutting the carbon steel process. Zhenjiang: Jiangsu university(2011).

[5] Feng wenjie, Qin fengdong and Chen yingying: Analysis of technological parameter for laser cutting stainless sheet. Machinery Design & Manufacture, Vol. 11( 2011), p.191.

[6] Xie Xiaozhu, Li lijun and Zhang Yi: Newly developed technique of laser cutting thick metal plates. LASER TECHNOLOGY, Vol. 29(2005), p.251.

[7] Guan Banggui, Liao Jianhong and Meng Hongyun: Study of cutting Prection Gear Wheel with Filber Laser. Applied Laser, Vol. 25( 2015), p.365.

[8] Hua yinqun, Chen ruifang and Zhang Yongkang: Comparison inspection and control method of surface quality of laser of laser cutting. Heat Treatment of Metals, Vol. 26(2001), p.25.

[9] Kaebernick H, Bicleanu D and Brandtm: Theoretical and experiment investigation of pulsed laser cutting. Annual of CIRP, Vol. 48(1999), p.163.

DOI: 10.1016/s0007-8506(07)63156-4

[10] B.S. Yilbas: Laser cutting quality assessment and thermal efficiency analysis. Jounal of Materials Processing Technology, Vol. 155-156(2004), p.2106.

DOI: 10.1016/j.jmatprotec.2004.04.194

[11] Chen Jimin and ZuoTiechun: Effect of Beam Incident Angle on Laser Cutting Quailty. Chinese Journal Lasers, Vol. A28, (2001), p.1037.

[12] Hu Guanhu and Hu Jun: Analysis of Formation Mechanism of the Upper Striation on the Cutting Surface During the Laser Fusion Cutting Process. Applied Laser, Vol. 33(2013), p.536.

DOI: 10.3788/al20133305.0536

[13] Koji Hirano and Remy Fabbro: Experimental investigation of hydrodynamics of melt layer during laser cutting of steel,J. Phys. D. Appl. Phys., Vol. 44(2011), p.1055.

DOI: 10.1088/0022-3727/44/10/105502