Measuring Device for the Cutting Parameters Monitoring during Drilling

Abstract:

A drilling process quality and a drill life depend on the cutting conditions optimal setting. Research in the area of cutting fluid composition and drilling tools parameters for nonstandard material setting is performed at Technical university of Liberec. Real drilling parameters monitoring is essential during this research. Axial force and torque are two basic parameters describing this process. The measuring device for these parameters monitoring which was built at Technical university of Liberec is described in this paper.

• Periodical: Applied Mechanics and Materials (Volume 827)
• Pages: 15-18
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.827.15
• Online since: February 2016
• Authors: Aleš Lufinka*, Jaroslav Votoček
• Keywords: Cutting Force, Drilling Process, Measuring Device, Strain Gauges Sensor

References

[1] J. Beňo, Theory of metal cutting, Košice, Technical university of Košice, (1999).

[2] J. Gazda, Theory of machining, Liberec, Technical university of Liberec, (2009).

[3] V. Dráb, Technology 1 – Practical lessons, Liberec, Technical university of Liberec, (1989).

[4] Information on http: /www. hbm. com/en/menu/products/strain-gages-accessories.

[5] Information on http: /www. burster. com.

[6] Information on http: /www. ni. com.