Experimental Verification of Vibration Reduction of the Steel Platform for Two Limestone Sorters

Jiří Šmejkal; František Plánička

doi:10.4028/www.scientific.net/AMM.827.35

Paper Titles

Environmental Conditions Effect for Adhesive Connections in Glass Structures
p.19

Clinched Joint Tensile Test
p.23

Influence of Coating on the Poisson's Ratio of Woven Fabrics
p.27

Non-Destructive Measurement of Plastic Deformation under the Extreme Environments
p.31

Experimental Verification of Vibration Reduction of the Steel Platform for Two Limestone Sorters
p.35

Solid Particle Erosion of Selected HVOF Sprayed Coatings
p.39

Testing of Space Frames Made of Composite Materials
p.47

CFRP Fuselage Panel Behavior Monitoring Using Fibre Optic and Resistance Sensors and Optical Contactless Measurements
p.51

Experimental Analysis of Planetary Transmission Load Sharing
p.57

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 827Experimental Verification of Vibration Reduction...

Experimental Verification of Vibration Reduction of the Steel Platform for Two Limestone Sorters

Abstract:

The article deals with damping design for steel platform with sorters for limestone. The steel platform has very small damping for two vibration sorters. The sorters are situated in the third floor of old reinforced concrete frame building. The sorters (Fig. 1) are supported by rubber springs (Fig. 2), bud the rest energy from vibration of sorters excite the supporting platform. The response of the platform is unacceptable for both service people and for technology. Therefore vibration absorber for minimization of the response of the steel platform was developed

You might also be interested in these eBooks

Applied Methods of the Analysis of Static and Dynamic Loads of Structures and Machines II

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 827)

Pages:

35-38

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.827.35

Citation:

Cite this paper

Online since:

February 2016

Authors:

Jiří Šmejkal, František Plánička*

Keywords:

Damping of Steel Platform, Elastic Support, Limestone Sorter Based on Vibrations, Vibration Absorber

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] Král, J., Makovička, D.: Vibration construction of sorting plant in Vápenka Čertovy Schody a. s., KÚ ČVUT Prague, contract DC 100323, 2010, (in Czech).

Google Scholar

[2] Technological documentation of limestone sorters (XEFG 1003 Binder & Co), Information on http: /www. binder-co. com.

Google Scholar

[3] ČSN 730032 Calculation of building structures loaded with dynamic effects of machines, ČNI Prague 1977 (in Czech).

Google Scholar

[4] Major, A.: Dynamic in Civil Engineering, Akademiai Kiado, Budapest (1980).

Google Scholar

[5] Šmejkal, J.: Dynamic analysis. BP 2959-P-034-97. Project Vápenka Čertovy Schody a. s. – installation of new sorters,. ARCADIS Bohemiaplan s. r. o., Plzeň, 2011 (in Czech).

Google Scholar