CFD Analysis on Thermal Comfort and Indoor Air Quality Affected by Partitions in Air-Conditioned Building

Abstract:

This paper presents a CFD analysis on thermal comfort and indoor air quality affected by partitions in an air-conditioned building. CFD experiments are carried out to simulate variables of indoor air before/after installation or removal of partitions. Accordingly, the Predicted Mean Vote (PMV) is determined as an indicator of thermal comfort while the carbon dioxide concentration within an air-conditioned space is used for the assessment of indoor air quality. Some simulated results are validated by measurements with good agreement where a case study is conducted in an air-conditioned space of a library. With the proposed methodology, it can be recommended in a case study that the significant effects of partition on thermal comfort are observed where the area with neutral sensation and slightly-cool sensation reduces significantly. The occupants feel uncomfortably cold after installing partition. The carbon dioxide concentrations slightly increase in some areas but the average concentration remains acceptable according to ASHRAE standard. Without the reinforcement of the air-conditioning units, the installation of partition at the desired location is not encouraged regarding to occupant’s thermal comfort and indoor air quality.

• Periodical: Applied Mechanics and Materials (Volume 836)
• Pages: 121-126
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.836.121
• Online since: June 2016
• Authors: Pradip Aryal*, Thananchai Leephakpreeda
• Keywords: Computational Fluid Dynamics, Indoor Air Quality, Partition, Pmv, Thermal Comfort

References

[1] A.P. Jones, Indoor air quality and health, Atmospheric Environment. 33 (1999) 4535-4564.

DOI: 10.1016/s1352-2310(99)00272-1

[2] G. Heidarinejad, M.H. Fathollahzadeh, H. Pasdarshahri, Effects of return air vent height on energy consumption, thermal comfort conditions and indoor air quality in an under floor air distribution system, Energy and Building. 97 (2015) 155-161.

DOI: 10.1016/j.enbuild.2015.04.004

[3] M. Bojic, F. Yik, T.Y. LO, Locating air-conditioners and furniture inside residential flats to obtain good thermal comfort, Energy and Building. 34 (2002) 745-751.

DOI: 10.1016/s0378-7788(01)00143-8

[4] T. Karimipanah, H.B. Awbi, M. Sandberg, C. Blomqvist, Investigation of air quality, comfort parameters and effectiveness for two floor-level air supply systems in classrooms, Building and Environment. 42 (2007) 647-655.

DOI: 10.1016/j.buildenv.2005.10.016

[5] P. Rohdin, B. Moshfegh, Numerical modeling of industrial indoor environments: A comparison between different turbulence models and supply systems supported by field measurements, Building and Environment. 46 (2011) 2365-2374.

DOI: 10.1016/j.buildenv.2011.05.019

[6] ANSI, ASHRAE Standard 55, Thermal Environmental Conditions for Human Occupancy, American Society of Heating, Refrigerating, and Air-conditioning Engineers, Atlanta (2010).

[7] P.O. Fanger, Calculation of thermal comfort, Introduction of a basic comfort equation. ASHRAE transactions. 73 (1967) 1-20.

[8] ISO Standard 7730, Moderate thermal environments–Determination of the PMV and PPD indices and specification of the conditions for thermal comfort. (1994).

DOI: 10.3403/00814151

[9] J.M. Daisey, W.J. Angell, M.G. Apte, Indoor air quality, ventilation and health symptoms in schools: an analysis of existing information, Indoor air. 13 (2003) 53-64.

DOI: 10.1034/j.1600-0668.2003.00153.x

[10] S. Atthajariyakul, T. Leephakpreeda, Real-time determination of optimal indoor-air condition for thermal comfort, air quality and efficient energy usage, Energy and Buildings. 36 (2004) 720-733.

DOI: 10.1016/j.enbuild.2004.01.017

[11] ASHRAE Standard 62, Ventilation for Acceptable Indoor Air Quality, American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta (2001).

[12] P.O. Fanger, Thermal environment-Human requirements, Environmentalist. 6 (1986) 275-278.