Hot Radial Upset-Extruding Process for Tube Structure with a Nozzle of 316LN Stainless Steel

Abstract:

AP1000 nuclear power main pipe, a type of complicated thick-walled tube structure with both high and thick-walled nozzles, is one of the key parts in nuclear island. It is required to be manufactured by integral plastic forming technique. Up to now, no economical and efficient plastic forming process for AP1000 main pipe has been reported. To aim for forming the tube structure with a nozzle such as AP1000 main pipe, a radial upset-extruding (RUE) process was developed, in which the initial billet is an extruded tube with a hole. RUE process is an extrusion method which realizes radial outflow of the metal around the hole of tube billet through an axial upsetting force and restriction of dies. Thick-walled tube structure with a nozzle derived from AP1000 main pipe was simplified to be a thick-walled three-way pipe, on which RUE process was analyzed based. Combined with reduced scale model experiments, thermomechanical coupled finite element analysis integrated with recrystallization models of 316LN was performed to investigate RUE process. Metal flow, deformation distribution, recrystallization distribution, and extrusion load and clamping load in RUE process was analyzed. The experimental workpiece of pure lead based on reduced scale model validate metal flow behavior predicted by using numerical simulation. The results indicate that the essence of RUE process is to deflect the flow of the material around the orifice of the tube billet. The loads of dies are significantly sensitive to the initial forming temperature and the friction coefficient, while the impact of the extrusion velocity is negligible. RUE process could be used to form thick-walled tube structure with a nozzle, and it has a potential for solving the manufacture of AP1000 main pipe.

• Periodical: Advanced Materials Research (Volumes 1004-1005)
• Pages: 1245-1255
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.1004-1005.1245
• Online since: August 2014
• Authors: Xin Wang*, Xiao Feng, Lei Zhang, Feng Lin, Ji Luan Pan
• Keywords: 316LN, AP1000, Main Pipe, Three-Way Pipe, Tube Structure, Upset-Extruding Process

References

[1] H. Kang: Stress Corrosion Cracking of 316LN Austenitic Stainless Steel Weld Joints (Master Dissertation, Shanghai Jiao Tong University, 2012). p.76(In Chinese).

[2] L. Liu, Z. Zhong, T. Xie and J. Gao: Die & Mould Industry, Vol. 35 (2009) No. 2, pp.26-30(In Chinese).

[3] L. Gu, J. Zhang and L. Chu: Forging & Stamping Technology, Vol. 35 (2010) No. 3, pp.71-75(In Chinese).

[4] T. Sokolowski, K. Gerke and M. Ahmetoglu: Journal of Materials Processing Technology, Vol. 98 (2000) pp.34-40.

[5] P. Du: Study on New Technology of Hot-pressing Forming for High Pressure T-tube (Master Dissertation, Yanshan University, 2011). p.62(In Chinese).

[6] F. Lin, L. Zhang, F. Sun, Y. Liu, G. Li and R. Zhang: Chinese Journal of Mechanical Engineering, Vol. 48 (2012) No. 18, pp.13-20(In Chinese).

[7] H. Lu: Shanghai Metals, (2010)No. 4, pp.29-32(In Chinese).

[8] F. Sun and Q. Ma: Heavy Casting and Forging, (2010)No. 4, pp.30-32(In Chinese).

[9] F. Na: Nuclear Safety, (2010)No. 2, pp.19-24(In Chinese).

[10] S. Song, Z. Liu and J. Zheng: Heavy Casting and Forging, (2011) No. 1, pp.1-4(In Chinese).

[11] L. Liu: AP1000 Nuclear Power Main Pipe Bending Technology Research (Master Dissertation, Yanshan University, 2013). p.47(In Chinese).

[12] D. Fu: The Quality Control Technology Research for Hot Bending Process of the Hot Section in AP1000 Main Pipe System (Master Dissertation, Yanshan University, 2012). p.61(In Chinese).

[13] F. Lin, X. Wang, J. Pan, L. Zhang, T. Zhang and X. Feng: C.N. Patent 21C. (2013)(In Chinese).

[14] J.T. Yeom, C.S. Lee, J.H. Kim and N. Park: Materials Science and Engineering a, Vol. 449-451 (2007) pp.722-726.

[15] Y. Wang and G. Fang: Advanced Materials Research, Vol. 160-162 (2011) pp.492-497.

[16] R. Wu, X. Wang and L. Zhang: Journal of Plasticity Engineering, (2009)No. 4, pp.95-99(In Chinese).

[17] J. Sun: Friction and Lubrication of Material Forming, (National Defence Industry Press, China 2007), p.173(In Chinese).

[18] K.L. Kovalev and V.A. Ryabov: Glass and Ceramics, (1960)No. 7, pp.352-357.

[19] P. Pan, Y. Zhong, Q. Ma and C. Yuan: J Tsinghua Univ(Sci & Tech), Vol. 53 (2013)No. 3, pp.289-294(In Chinese).

[20] P. Pan, Y. Zhong, Q. Ma, C. Yuan and S. Zhu: China Mechanical Engineering, Vol. 23 (2012)No. 11, pp.1354-1359(In Chinese).

[21] M. Chen: Experimental and Simulation Research on the Law of Grain Evolution during the Forging Process for 316LN Stainless Steel (Master Dissertation, Taiyuan University of Science and Technology, 2010). p.63(In Chinese).

[22] J. Peng, Y. Yan, R. Zhang and F. Lin: Chinese Journal of Mechanical Engineering, Vol. 44 (2008)No. 6, pp.108-113(In Chinese).