Alkali Treatment of Kenaf Fiber Mat and its Influence on the Performance of Unsaturated Polyester/Kenaf Fiber Mat Composites

Abstract:

Non-woven kenaf fiber mats were prepared from untreated and alkali treated fibers by using a carding machine followed by needle punching. The alkali treatment was carried out by immersing the fiber mats in 6% NaOH solution for 0, 1, 2, 3, 4, and 5 h at room temperature. The untreated and alkali treated fiber mats were impregnated with unsaturated polyester resin via a resin transfer molding technique to form composites. Maximum improvements of flexural strength and flexural modulus of the composites were observed when the fiber mat was alkali treated for 3 h. The improved of both properties can be attributed to better fiber-matrix adhesion between the alkali treated kenaf fiber and the unsaturated polyester matrix most probably via mechanical interlocking. Water absorption tests were conducted by immersing the composite samples in distilled water at room temperature. The water absorption patterns of all the composites were found to follow Fickian behavior. The tendency of the composites to absorb water decreased when the alkali treated fiber mats were used.

• Periodical: Advanced Materials Research (Volume 1024)
• Pages: 171-174
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.1024.171
• Online since: August 2014
• Authors: Razaina Mat Taib*, Dody Ariawan, Zainal Arifin Mohd Ishak
• Keywords: Alkali Treatment, Flexural Properties, Kenaf Fiber Mat, Unsaturated Polyester, Water Absorption

References

[1] X. Li, L.G. Tabil and S. Panigrahi, Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review. J Polym Environ, 15 (2007) 25-33.

DOI: 10.1007/s10924-006-0042-3

[2] J. Gassan and A.K. Bledzki, Alkali treatment of jute fibers: relationship between structure and mechanical properties. J Appl Polym Sci, 71 (1999) 623-629.

DOI: 10.1002/(sici)1097-4628(19990124)71:4<623::aid-app14>3.0.co;2-k

[3] W. Liu, A.K. Mohanty, L.T. Drzal, P. Askel and M. Misra, Effects of alkali treatment on the structure, morphology and thermal properties of native grass fibers as reinforcements for polymer matrix composites. J Mater Sci, 39 (2004) 1051-1054.

DOI: 10.1023/b:jmsc.0000012942.83614.75

[4] C.A. Boynard, S.N. Monteiro, J.R.M. d'Almeida, Aspects of alkali treatment of sponge gourd (Luffa cylindrica) fibers on the flexural properties of polyester matrix composites. J Appl Polym Sci, 87 (2003) 1927-(1932).

DOI: 10.1002/app.11522

[5] L.Y. Mwaikambo and M. P. Ansell, Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization. J Appl Polym Sci, 84 (2002) 2222-2234.

DOI: 10.1002/app.10460

[6] D. Ray, B.K. Sarkar, A.K. Rana and N.R. Bose, The mechanical properties of vinylester resin matrix composites reinforced with alkali-treated jute fibres. Composites: Part A, 32 (2001) 119-127.

DOI: 10.1016/s1359-835x(00)00101-9

[7] K. Goda, M.S. Sreekala, A. Gomes, T. Kaji and J. Ohgi, Improvement of plant based natural fibers for toughening green composites—Effect of load application during mercerization of ramie fibers. Composites: Part A, 37 (2006) 2213-2220.

DOI: 10.1016/j.compositesa.2005.12.014