Medium Density Particleboard with Addition of Impregnated Paper

Juliana Cortez Barbosa; Anderson Luiz da Silva Michelon; Elen Aparecida Martines Morales; Cristiane Inácio de Campos; André Luis Christoforo; Francisco Antonio Rocco Lahr

doi:10.4028/www.scientific.net/AMR.1025-1026.543

Paper Titles

Effect of ZnO Nanoparticles Synthesized by Precipitation Method on Cure Characteristics and Morphology of EPDM Foam
p.525

Exhaust Dyeing Poly(Lactic Acid) Fabrics with Indigo Dye Obtained from Indigofera Tinctoria
p.531

Experimental Study on the Thermal Conductivity of Thermal Insulation Materials Used in Residential Buildings
p.535

Life Cycle CO₂ Emission Assessment for Non-Steam Curing Precast Concrete
p.539

Medium Density Particleboard with Addition of Impregnated Paper
p.543

Utilization of Terahertz Spectroscopy for Optical Behavior Determination of Recycled Modified HDPE
p.547

Ionizing Radiation Effect of HDPE Measured by Nano-Hardness
p.551

Creep of Radiation Cross Linked HDPE at Elevated Temperature
p.555

Multilayer Medium Density Particleboard Using Castor Oil-Based Polyurethane Resin and Hevea Brasiliensis Wood
p.559

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 1025-1026Medium Density Particleboard with Addition of...

Medium Density Particleboard with Addition of Impregnated Paper

Abstract:

The aim of this research was to produce three-layer Medium Density Particleboard (MDP), with the addition of impregnated paper, in the inner layer, in proportions of 1; 5 and 20%. In this study, MDP was composed with particles of small size in outer layers, and larger particles in internal layer. After panel manufacturing, physical and mechanical tests based on Brazilian Code ABNT NBR 14.810 were carried out to determine moisture content; density; thickness swelling; water absorption; modulus of rupture (MOR) and modulus of elasticity (MOE) in static bending and internal adhesion. Test results were compared to commercial panels, produced with 100% Eucalyptus, considering the requirements specified by Brazilian Code. Properties presented values close to normative specifications, indicating positively the possibility of production of MDP using addition of waste paper impregnated.

You might also be interested in these eBooks

Advanced Materials, Structures and Mechanical Engineering

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 1025-1026)

Pages:

543-546

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.543

Citation:

Cite this paper

Online since:

September 2014

Authors:

Juliana Cortez Barbosa*, Anderson Luiz da Silva Michelon, Elen Aparecida Martines Morales, Cristiane Inácio de Campos, André Luis Christoforo, Francisco Antonio Rocco Lahr

Keywords:

Impregnated Paper Addition, Medium Density Particleboard

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] F.S. Ferro, D.H. Almeida, A.M. Souza, F.H. Icimoto, A.L. Christoforo and F.A.L. Rocco: Adv. Mater. Res Vol. 884-885 (2014), p.667.

Google Scholar

[2] L.S. Alves, S.A.M. Silva, M.A. Azambuja, L.D. Varanda, A.L. Christoforo, D. Goncalves and F.A.L. Rocco: Int. J. Comp. Mater. Vol. 4 (2014), p.30.

Google Scholar

[3] D.A.P.L. Silva, L.D. Varanda, A.L. Christoforo, F.A.L. Rocco: Inter. J. Mater. Eng. Vol. 2, No. 6 (2012), p.75.

Google Scholar

[4] L.S. Alves, S.A.M. Silva, M.A. Azambuja, L.D. Varanda, A.L. Christoforo and F.A.L. Rocco: Adv. Mater. Res. Vol. 884-885 (2014), p.689.

Google Scholar

[5] Brazilian Association of Technical Standards. ABNT NBR 14. 810. Sheet of particleboard: Part 1: Terminology, Part 2: Requirements, Part 3: test methods (2002).

Google Scholar

[6] S. Iwakiri: Reconstituted wood panels. Curitiba: FUPEF (2005), p.247.

Google Scholar