Single-Layer Mechanical Fastening Waterproofing Systems

Tomáš Petříček; Petr Kacálek; Radim Smolka

doi:10.4028/www.scientific.net/AMR.1041.71

Paper Titles

Non-Traditional Thermal-Insulating and Rehabilitation Materials and their Hygrothermal Behaviour
p.59

Comparison of Measuring Instruments and Methods for Determining the Moisture Content of Wood
p.63

Studying of the Behavior of Thermal Insulation Materials Based on Natural Fibers for Incorporation into the Building Structure
p.67

Single-Layer Mechanical Fastening Waterproofing Systems
p.71

Usage of Hydrophilic Mineral Wool Panels in Green Roof Systems in Passive Houses
p.75

New Structures for Transparent Roofs
p.79

Hempcrete – An Environmentally Friendly Material?
p.83

The Future of the Polystyrene as Thermal Insulation in Buildings
p.87

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 1041Single-Layer Mechanical Fastening Waterproofing...

Single-Layer Mechanical Fastening Waterproofing Systems

Abstract:

Single-layer mechanical fastening waterproofing systems are often used within the compositions of flat roofs. Although in case of plastic based systems it is a common solution, for bitumen sheets it handles about a relatively new approach, since the application of asphalt has a long history in the building industry.There are some key factors which all of the one-layer mechanically fastening systems should meet, especially water-resistance and resistance against the suction of wind. The application of dynamic loads on the joints may damage the bonds, which may lead to leakage of water. In particular the most delicate locations are the anchoring points at places where the waterproofing sheets are not connected mutually and the wind is captured.Research was focused on the extent at which the strength of the resulting mechanically fastened joints is affected by the placement of fastenings elements within the strip overlap, including the possibilities when the distances from the edge.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 1041)

Pages:

71-74

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1041.71

Citation:

Cite this paper

Online since:

October 2014

Authors:

Tomáš Petříček*, Petr Kacálek, Radim Smolka

Keywords:

Bitumen Sheet, Flat Roof, Mechanical Fastening System, Single-Layer Waterproofing

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] FAJKOŠ A., PLACHÝ J., PETŘÍČEK T. 2008. Pevnost spojů jednovrstvých mechanicky kotvených asfaltových pásů. Sympózium Strechy 2008, STU Bratislava, Bratislava 2008, ISBN 978-80-227-2990-1.

Google Scholar

[2] ČSN EN 13707+A2. Hydroizolační pásy a fólie – Vyztužené asfaltové pásy pro hydroizolaci střech – Definice a charakteristiky. Praha: Úřad pro technickou normalizaci, metrologii, a státní zkušebnictví, 12/(2009).

Google Scholar

[2] ČSN EN 12316-1. Hydroizolační pásy a fólie – Část 1: Asfaltové pásy pro hydroizolaci střech – Stanovení odolnosti proti odlupování ve spojích. Praha: Praha: Český normalizační institut, 10/(2000).

Google Scholar

[4] ČSN EN 12316-2. Hydroizolační pásy a fólie – Část 2: Plastové a pryžové pásy a fólie pro hydroizolaci střech – Stanovení odolnosti proti odlupování ve spojích. Praha: Praha: Český normalizační institut, 10/(2000).

Google Scholar

[5] ETAG 006. Řídící pokyn pro evropská technická schválení – Systémy mechanicky kotvených pružných střešních hydroizolačních povlaků. Brusel: Evropská organizace pro technická schválení - EOTA, 03/(2000).

Google Scholar