Preparation of Ni/YSZ Anode Material Using Gel-Tape Casting and Performance Analysis

Zhong Zhou Yi; Feng Rui Zhai; Ying Li; Wei Liu; Zhi Peng Xie

doi:10.4028/www.scientific.net/AMR.105-106.650

Paper Titles

Effect of Tetraethoxysilane Infiltration on Properties of 2.5D Quartz Fibers Reinforced Silica
p.635

Electrodeposition of Porous ZnO Electrodes in the Presence of Cetyltrimethylammonium Bromide
p.639

Effect of Sintering Temperature on the Behavior of Oxygen Permeation for La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ Tubular Membranes
p.643

Proton Transport in Nafion117 Membranes by Molecular Dynamics
p.647

Preparation of Ni/YSZ Anode Material Using Gel-Tape Casting and Performance Analysis
p.650

Synthesis and Characterization of the Cathode Materials La_0.7Sr_0.15Ca_0.15Co_1-yFe_yO_3-δ for ITSOFC
p.653

Preparation of Double-Perovskites Sr₂Fe_1-xSc_xMoO_6-δ Powders for the Cathode of SOEC by Sol-Gel Citrate Method
p.657

Preparation and Characterization of ZrO₂ Nanopowders for Solid Oxide Fuel Cells
p.660

Synthesis and Electrochemical Properties of 0.5Li₂MnO₃•0.5LiMn_0.5Ni_0.5O₂
p.664

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 105-106Preparation of Ni/YSZ Anode Material Using...

Preparation of Ni/YSZ Anode Material Using Gel-Tape Casting and Performance Analysis

Abstract:

Ni/YSZ cermet is the most widely used anode material for solid oxide fuel cell. In this paper, the NiO/YSZ green body was prepared by gel-tape casting, using 15%wt. starch as pore-forming agent, in the mixed polyvinyl alcohol and acrylamide systems. Ni/YSZ anode material was obtained after sintered at 1450°C for 2h and reduced at 800°C in H2 atmosphere for 4h. The anode porosity, XRD, TGA and microstructures were measured. YSZ formed a continuous network structure and Ni particles were dispersed homogeneously in the YSZ network. It is suitable to fabrication of anode material for solid oxide fuel cell.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 105-106)

Pages:

650-652

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.105-106.650

Citation:

Cite this paper

Online since:

April 2010

Authors:

Zhong Zhou Yi, Feng Rui Zhai, Ying Li, Wei Liu, Zhi Peng Xie

Keywords:

Electrical Conductivity, Gel-Tape-Casting, Microstructure, Ni/YSZ Anode Material

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] G. Robert, A. Kaiser, and E. Batawi: European Fuel Cell Forum, Oberrohrdorf, Switzerland, Vol. 1 (2004), pp.193-200.

Google Scholar

[2] T. Klemens, M. Mogensen: J. Am. Ceram. Soc. Vol. 90.

Google Scholar

[11] (2007), pp.3582-3588.

Google Scholar

[3] S. F. Corbin, P. S. Apte:J. Am. Ceram. Soc. Vol. 82.

Google Scholar

[7] (1999), p.1693.

Google Scholar

[4] M. Boaro, J. M. Vohs and R. J. Gorte: J. Am. Ceram. Soc. Vol. 86.

Google Scholar

[3] (2003), pp.395-400.

Google Scholar

[5] Y. Jiang, A. V. Virkar: J. Electrochem. Soc. Vol. 150.

Google Scholar

[7] (2003), pp.942-51.

Google Scholar

[6] V. Esposito, D.Z. de Florio, F.C. Fonseca, et al.: J. Eur. Ceram. Soc. Vol. 25 (2005), p.2637.

Google Scholar

[7] P. Lenormand, D. Caravaca, C. Laberty-Robert, et al.: J. Eur. Ceram. Soc. Vol. 25 (2005), p.2643.

Google Scholar

[8] K. Niihara, B. -S. Kim, T. Nakayama and T. Kusunose: J. Eur. Ceram. Soc. Vol. 24 (2004), p.3419.

Google Scholar

[9] A.C. Young, O.O. Omatete, M.A. Janney, et al.: J. Am. Ceram. Soc. Vol. 74 (1991), p.612.

Google Scholar

[10] T. Fukui, S . Ohara: J. Power Sources. Vol. 110 (2002), pp.91-95. Fig. 4 SEM of gel-tape casting YSZ/NiO green body Fig. 5 The fracture surface of gel-tape casting Ni/YSZ: (a) surface, (b) the fracture surface.

DOI: 10.1016/s0378-7753(02)00218-5

Google Scholar