The Shear Strength of Epoxy Adhesive Used for Chemical Anchors

Abstract:

This paper summarizes the results of pilot experimental research focused on determination of the behaviour and bond strength limits of currently most widespread industrial glues used for anchor bonding. The goal of this research is to find the limits of the effective use of such glue types in high performance concrete, and also to verify the most commonly used design methods for bonded anchors. The progress and configuration of the experiments are described. The goal of this research is to find the limits of effective use of these glue types in high performance concrete and also verification of mostly used design methods. The article is closely focused on bond strength experiments using high strength concrete up to class C50/60 or higher together with pure epoxy resin and FRP reinforced resin).

• Periodical: Advanced Materials Research (Volume 1122)
• Pages: 278-281
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.1122.278
• Online since: August 2015
• Authors: Jan Barnat*, Miroslav Bajer
• Keywords: Adhesive, Bond Strength, Chemical Anchors, Experiment, Failure

References

[1] ETAG 001 Anchoring design methods, EOTA-European Organisation for Technical Approvals, Avenue des Arts 40, Kunstlaan, 1040 Brusel (2011).

[2] ČSN P CEN/TS 1992-4-5, Design of fastenings for use in concrete – Part 4- 5: Post-installed fasteners – Chemical systems, CEN, 2 Avenue Marnix 17, B-1000 Brusel (2009).

DOI: 10.1002/9783433602737.ch9

[3] P. Hradil, J. Kala, Analysis of the Shear Failure of a Reinforced Concrete Wall, Applied Mechanics and Materials 621 (2014) 124-129.

DOI: 10.4028/www.scientific.net/amm.621.124

[4] Bajer, M.; Barnat, J. The Glue-Concrete Interface of Bonded Anchors. Construction and building materials 34(9) (2012) 267 – 274.

DOI: 10.1016/j.conbuildmat.2012.02.030