Influence of Magnetized Water on Mechanical Properties and Durability of Recycled Aggregate Concrete

Article Preview

Abstract:

The main objective of this study was to investigate the influence of using magnetized water on the mechanical properties and durability behavior in terms of freeze-thaw resistance of recycled aggregate concrete. In addition to the effect of different numbers of water rounds in the magnetic field, other variables including steel fibers, super-plasticizers and silica-fume were considered in the concrete production in order to achieve the ideal possible performance for recycled aggregate concrete made with 100% coarse aggregates replacements. For this purpose, a total of 11 concrete mixes were prepared and tested. At the first step, the effects of the mentioned variables on the basic properties, including workability, water absorption, compressive strength, splitting tensile strength, flexural strength and freeze-thaw durability test were investigated. Additionally, flexural toughness was evaluated in accordance with the post-crack strength (PCS) method and the microstructure of concrete specimens was also observed by using scanning electron microscope (SEM). The results of most experiments indicated that magnetized water, although highly effective on the mechanical properties of concrete, should not be solely utilized as a compensating factor for the defects caused by recycled coarse aggregates. The optimum toughness and durability results regarding the fiber-reinforced concrete mixes produced with recycled coarse aggregates, were related to samples containing silica-fume and 10-rounds magnetized water. Furthermore, the existence of cement replaced by 10% of silica-fume and 10-rounds magnetized water in the concrete mix MW-SF2, increased the durability of the recycled aggregate concrete by an average of approximately 63%.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

25-46

Citation:

Online since:

September 2022

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2022 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] F. Debieb, L. Courard, S. Kenai, and R. Degeimbre, Roller compacted concrete with contaminated recycled aggregates, Construction and Building Materials, vol. 23, no. 11, pp.3382-3387, (2009).

DOI: 10.1016/j.conbuildmat.2009.06.031

Google Scholar

[2] S. Ahmad, D. Fisher, and K. Sackett, 23 Mechanical properties of concretes with north carolina recyalced aggragtes, Integrated Design and Environmental Issues in Concrete Technology, p.251, (2014).

Google Scholar

[3] M. Tavakoli and P. Soroushian, Strengths of recycled aggregate concrete made using field-demolished concrete as aggregate, Materials Journal, vol. 93, no. 2, pp.178-181, (1996).

DOI: 10.14359/9802

Google Scholar

[4] R. M. Salem and E. G. Burdette, Role of chemical and mineral admixtures on the physical properties and frost-resistance of recycled aggre-gate concrete, Materials Journal, vol. 95, no. 5, pp.558-563, (1998).

DOI: 10.14359/398

Google Scholar

[5] K. K. Sagoe-Crentsil, T. Brown, and A. H. Taylor, Performance of concrete made with commercially produced coarse recycled concrete aggregate, Cement and concrete research, vol. 31, no. 5, pp.707-712, (2001).

DOI: 10.1016/s0008-8846(00)00476-2

Google Scholar

[6] J. M. Gómez-Soberón, Porosity of recycled concrete with substitution of recycled concrete aggregate: An experimental study, Cement and concrete research, vol. 32, no. 8, pp.1301-1311, (2002).

DOI: 10.1016/s0008-8846(02)00795-0

Google Scholar

[7] F. Olorunsogo and N. Padayachee, Performance of recycled aggregate concrete monitored by durability indexes, Cement and concrete research, vol. 32, no. 2, pp.179-185, (2002).

DOI: 10.1016/s0008-8846(01)00653-6

Google Scholar

[8] A. Shayan and A. Xu, Performance and properties of structural concrete made with recycled concrete aggregate, Materials Journal, vol. 100, no. 5, pp.371-380, (2003).

Google Scholar

[9] M. N. Abou-Zeid, M. N. Shenouda, S. L. McCabe, and F. A. El-Tawil, Reincarnation of concrete, Concrete International, vol. 27, no. 2, pp.53-59, (2005).

Google Scholar

[10] J. Xiao, J. Li, and C. Zhang, Mechanical properties of recycled aggregate concrete under uniaxial loading, Cement and concrete research, vol. 35, no. 6, pp.1187-1194, (2005).

DOI: 10.1016/j.cemconres.2004.09.020

Google Scholar

[11] T. C. Hansen and E. Boegh, Elasticity and drying shrinkage concrete of recycled-aggregate, in Journal Proceedings, 1985, vol. 82, no. 5, pp.648-652.

Google Scholar

[12] N. Otsuki, S.-i. Miyazato, and W. Yodsudjai, Influence of recycled aggregate on interfacial transition zone, strength, chloride penetration and carbonation of concrete, Journal of materials in civil engineering, vol. 15, no. 5, pp.443-451, (2003).

DOI: 10.1061/(asce)0899-1561(2003)15:5(443)

Google Scholar

[13] E. Vázquez, C. F. Hendriks, and G. Janssen, Influence of recycled concrete aggregates on concrete durability, in International RILEM Conference on the Use of Recycled Materials in Building and Structures, 2004, pp.554-562: RILEM Publications SARL.

DOI: 10.14359/51732784

Google Scholar

[14] H. Li et al., Recycled aggregates from construction and demolition waste as wetland substrates for pollutant removal, Journal of Cleaner Production, vol. 311, p.127766, (2021).

DOI: 10.1016/j.jclepro.2021.127766

Google Scholar

[15] J. Xu, Y. Liu, A. Simi, and J. Zhang, Recycling and reuse of construction and demolition waste: From the perspective of national natural science foundation-supported research and research-driven application, Case Studies in Construction Materials, p. e00876, (2022).

DOI: 10.1016/j.cscm.2022.e00876

Google Scholar

[16] C. Poon, S. Kou, and L. Lam, Influence of recycled aggregate on slump and bleeding of fresh concrete, Materials and Structures, vol. 40, no. 9, pp.981-988, (2007).

DOI: 10.1617/s11527-006-9192-y

Google Scholar

[17] K. Eguchi, K. Teranishi, A. Nakagome, H. Kishimoto, K. Shinozaki, and M. Narikawa, Application of recycled coarse aggregate by mixture to concrete construction, Construction and Building Materials, vol. 21, no. 7, pp.1542-1551, (2007).

DOI: 10.1016/j.conbuildmat.2005.12.023

Google Scholar

[18] J. Xiao, W. Li, Y. Fan, and X. Huang, An overview of study on recycled aggregate concrete in China (1996–2011), Construction and Building Materials, vol. 31, pp.364-383, (2012).

DOI: 10.1016/j.conbuildmat.2011.12.074

Google Scholar

[19] R. Dharmaraj, G. Arunvivek, A. Karthick, V. Mohanavel, B. Perumal, and S. Rajkumar, Investigation of mechanical and durability properties of concrete mixed with water exposed to a magnetic field, Advances in Civil Engineering, vol. 2021, (2021).

DOI: 10.1155/2021/2821419

Google Scholar

[20] E. M. Ibrahim and Z. K. Abbas, Effect of magnetic water on strength properties of concrete, in IOP Conference Series: Materials Science and Engineering, 2021, vol. 1067, no. 1, p.012002: IOP Publishing.

DOI: 10.1088/1757-899x/1067/1/012002

Google Scholar

[21] E. Bormashenko, Moses effect: Physics and applications, Advances in Colloid and Interface Science, vol. 269, pp.1-6, (2019).

Google Scholar

[22] Y. Wang, H. Wei, and Z. Li, Effect of magnetic field on the physical properties of water, Results in Physics, vol. 8, pp.262-267, (2018).

Google Scholar

[23] S. Bharath, S. Subraja, and P. A. Kumar, Influence of magnetized water on concrete by replacing cement partially with copper slag, J. Chem. Pharmaceutical Sci., vol. 9, no. 4, (2016).

Google Scholar

[24] N. Su and C.-F. Wu, Effect of magnetic field treated water on mortar and concrete containing fly ash, Cement and concrete composites, vol. 25, no. 7, pp.681-688, (2003).

DOI: 10.1016/s0958-9465(02)00098-7

Google Scholar

[25] A. R. Esfahani, M. Reisi, and B. Mohr, Magnetized water effect on compressive strength and dosage of superplasticizers and water in self-compacting concrete, Journal of Materials in Civil Engineering, vol. 30, no. 3, p.04018008, (2018).

DOI: 10.1061/(asce)mt.1943-5533.0002174

Google Scholar

[26] B. E. Jouzdani and M. Reisi, Effect of magnetized water characteristics on fresh and hardened properties of self-compacting concrete, Construction and Building Materials, vol. 242, p.118196, (2020).

DOI: 10.1016/j.conbuildmat.2020.118196

Google Scholar

[27] B. U. Ngene, O. M. Olofinnade, and C. E. Agomo, Effect of magnetized water on the mechanical properties of concrete containing recycled waste glass aggregate, in International Journal of Engineering Research in Africa, 2019, vol. 41, pp.103-114: Trans Tech Publ.

DOI: 10.4028/www.scientific.net/jera.41.103

Google Scholar

[28] N. Su, Y.-H. Wu, and C.-Y. Mar, Effect of magnetic water on the engineering properties of concrete containing granulated blast-furnace slag, Cement and Concrete Research, vol. 30, no. 4, pp.599-605, (2000).

DOI: 10.1016/s0008-8846(00)00215-5

Google Scholar

[29] A. S. Faris, R. Al-Mahaidi, and A. Jadooe, Implementation of magnetized water to improve the properties of concrete, International Journal Of Civil Engineering and Technology (IJCIET), vol. 5, no. 10, pp.43-57, (2014).

Google Scholar

[30] B. S. K. Reddy, V. G. Ghorpade, and H. S. Rao, Effect of magnetic field exposure time on workability and compressive strength of magnetic water concrete, Int J Adv Engg Tech/IV/III/July-Sept, vol. 120, p.122, (2013).

Google Scholar

[31] B. S. K. Reddy, V. G. Ghorpade, and H. S. Rao, Influence of magnetic water on strength properties of concrete, Indian journal of science and technology, vol. 7, no. 1, pp.14-18, (2014).

Google Scholar

[32] A. Shynier et al., Improving Some of Mechanical Properties of Concrete by Magnetic Water Technology, Ministry of Science and Technology, (2014).

Google Scholar

[33] T. Manjupriya and R. Malathy, Experimental Investigation on Strength and Shrinkage Properties of Concrete Mixed with Magnetically Treated Water, Magnesium, vol. 290, p.195, (2016).

Google Scholar

[34] X. Zhu, X. Chen, Y. Bai, Y. Ning, and W. Zhang, Evaluation of fracture behavior of high-strength hydraulic concrete damaged by freeze-thaw cycle test, Construction and Building Materials, vol. 321, p.126346, (2022).

DOI: 10.1016/j.conbuildmat.2022.126346

Google Scholar

[35] M. Kawamura and K. Torii, Reuse of recycled concrete aggregate for pavement, in Proceedings of the 2nd International RILEM Symposium on Demolition and Reuse of Concrete and Masonry, Tokyo, Japan, 1988, pp.7-11.

DOI: 10.1201/9781482271270-49

Google Scholar

[36] Y. Hosokawa, N. Maeda, and T. Hayasaka, Influence of the time of removing mortar from recycled coarse aggregate on the properties of concrete products using recycled coarse aggregate from waste concrete, in Proceedings of CSCE/JSCE International Conference on Engineering Materials, 1997, pp.775-788.

DOI: 10.1617/2912143640.017

Google Scholar

[37] A. E. Richardson, Compressive strength of concrete with polypropylene fibre additions, Structural survey, (2006).

Google Scholar

[38] P. Zhang, Q. Li, Y. Chen, Y. Shi, and Y.-F. Ling, Durability of steel fiber reinforced concrete containing SiO2 nano-particles, Materials, vol. 12, no. 13, p.2184, (2019).

DOI: 10.3390/ma12132184

Google Scholar

[39] ASTM, ASTM C150: Standard specification for Portland cement, 2001: ASTM Philadelphia^ ePA PA.

Google Scholar

[40] C. ASTM, 1240.(2014). Standard Specification for Silica-fume Used in Cementitious Mixtures, in American Society for Testing and Materials, pp.1-7.

Google Scholar

[41] C. Astm, 136. Standard test method for sieve analysis of fine and coarse aggregates, American Society for Testing and Materials, Philadelphia, PA, (2005).

Google Scholar

[42] ASTM, ASTM C494: Standard specification for chemical admixtures for concrete, ed: ASTM Philadelphia, PA, USA, (2011).

Google Scholar

[43] C. ASTM, 143: Standard test method for slump of hydraulic cement concrete, ASTM International, (2003).

Google Scholar

[44] M. Rezania, M. Panahandeh, S. Razavi, and F. Berto, Experimental study of the simultaneous effect of nano-silica and nano-carbon black on permeability and mechanical properties of the concrete, Theoretical and Applied Fracture Mechanics, vol. 104, p.102391, (2019).

DOI: 10.1016/j.tafmec.2019.102391

Google Scholar

[45] C. ASTM, 642, Standard test method for density, absorption, and voids in hardened concrete, Annual book of ASTM standards, vol. 4, p.02, (2006).

Google Scholar

[46] BS-EN, BS EN 12390-3: 2009: Testing hardened concrete. Compressive strength of test specimens, ed: BSI London, UK, (2009).

Google Scholar

[47] C. ASTM, 496/C 496M-04, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, (2004).

Google Scholar

[48] ASTM, C1018, Standard Test Method for Flexural Toughness and First-Crack Strength of Reinforced Concrete (Using Beam with Third-Point Loading. ASTM International, West Conshohocken, PA, (1997).

DOI: 10.1520/c1018

Google Scholar

[49] ASTM, Standard Practice for Making and Curing Concrete Test Specimens in the Field. , C31 ASTM International, West Conshohocken., (2012).

Google Scholar

[50] ASTM, C192/C192M (2014) Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, Annual Book of ASTM Standards, vol. 9, (2014).

Google Scholar

[51] BS-EN, 1340, Concrete kerb units–Requirements and test methods," British Standards Institution, London, (2003).

Google Scholar

[52] S. Yin, R. Tuladhar, F. Shi, M. Combe, T. Collister, and N. Sivakugan, Use of macro plastic fibres in concrete: A review, Construction and Building Materials, vol. 93, pp.180-188, (2015).

DOI: 10.1016/j.conbuildmat.2015.05.105

Google Scholar

[53] M. Mazloom and S. M. Miri, Interaction of magnetic water, silica-fume and superplasticizer on fresh and hardened properties of concrete, Advances in concrete construction, vol. 5, no. 2, p.087, (2017).

DOI: 10.12989/acc.2017.5.2.087

Google Scholar

[54] T. Ozbakkaloglu, A. Gholampour, and T. Xie, Mechanical and durability properties of recycled aggregate concrete: effect of recycled aggregate properties and content, Journal of Materials in Civil Engineering, vol. 30, no. 2, p.04017275, (2018).

DOI: 10.1061/(asce)mt.1943-5533.0002142

Google Scholar

[55] V. W. Tam and C. M. Tam, Parameters for assessing recycled aggregate and their correlation, Waste Management & Research, vol. 27, no. 1, pp.52-58, (2009).

DOI: 10.1177/0734242x07079875

Google Scholar

[56] S. Yehia, K. Helal, A. Abusharkh, A. Zaher, and H. Istaitiyeh, Strength and durability evaluation of recycled aggregate concrete, International journal of concrete structures and materials, vol. 9, no. 2, pp.219-239, (2015).

DOI: 10.1007/s40069-015-0100-0

Google Scholar

[57] M. Gholhaki, M. Hajforoush, and M. Kazemi, An investigation on the fresh and hardened properties of self-compacting concrete incorporating magnetic water with various pozzolanic materials, Construction and Building Materials, vol. 158, pp.173-180, (2018).

DOI: 10.1016/j.conbuildmat.2017.09.135

Google Scholar

[58] R. Gagn, A. Boisvert, and M. Pigeon, Effect of superplasticizer dosage on mechanical properties, permeability, and freeze-thaw durability of high-strength concretes with and without silica-fume, Materials Journal, vol. 93, no. 2, pp.111-120, (1996).

DOI: 10.14359/1407

Google Scholar

[59] W. S. Barham, B. Albiss, and O. Latayfeh, Influence of magnetic field treated water on the compressive strength and bond strength of concrete containing silica-fume, Journal of Building Engineering, vol. 33, p.101544, (2021).

DOI: 10.1016/j.jobe.2020.101544

Google Scholar

[60] H. Wei, Y. Wang, and J. Luo, Influence of magnetic water on early-age shrinkage cracking of concrete, Construction and Building Materials, vol. 147, pp.91-100, (2017).

DOI: 10.1016/j.conbuildmat.2017.04.140

Google Scholar

[61] Z. Deng, F. Shi, S. Yin, and R. Tuladhar, Characterisation of macro polyolefin fibre reinforcement in concrete through round determinate panel test, Construction and Building Materials, vol. 121, pp.229-235, (2016).

DOI: 10.1016/j.conbuildmat.2016.05.134

Google Scholar

[62] J. J. Li, C. J. Wan, J. G. Niu, L. F. Wu, and Y. C. Wu, Investigation on flexural toughness evaluation method of steel fiber reinforced lightweight aggregate concrete, Construction and Building Materials, vol. 131, pp.449-458, (2017).

DOI: 10.1016/j.conbuildmat.2016.11.101

Google Scholar

[63] P. Sukontasukkul, P. Pongsopha, P. Chindaprasirt, and S. Songpiriyakij, Flexural performance and toughness of hybrid steel and polypropylene fibre reinforced geopolymer, Construction and Building Materials, vol. 161, pp.37-44, (2018).

DOI: 10.1016/j.conbuildmat.2017.11.122

Google Scholar

[64] JSCE, SF-4, Method of Test for Flexural Strength and flexural Toughness of Fiber Reinforced concet: JCI Standard SF-4,, 1984: Japan Society of Civil Engineers Tokyo.

Google Scholar

[65] N. Banthia and J.-F. Trottier, Test methods for flexural toughness characterization of fiber reinforced concrete: some concerns and a proposition, ACI Materials Journal, vol. 92, pp.48-48, (1995).

DOI: 10.14359/1176

Google Scholar

[66] H. Karam and O. Al-Shamal, Effect of using magnetized water on concrete properties, in SCMT3 Conference, Kyoto Japan, (2013).

Google Scholar

[67] N. Banthia and M. Sappakittipakorn, Toughness enhancement in steel fiber reinforced concrete through fiber hybridization, Cement and concrete research, vol. 37, no. 9, pp.1366-1372, (2007).

DOI: 10.1016/j.cemconres.2007.05.005

Google Scholar

[68] Y.-W. Chan and S.-H. Chu, Effect of silica-fume on steel fiber bond characteristics in reactive powder concrete, Cement and concrete research, vol. 34, no. 7, pp.1167-1172, (2004).

DOI: 10.1016/j.cemconres.2003.12.023

Google Scholar

[69] V. Corinaldesi and G. Moriconi, Influence of mineral additions on the performance of 100% recycled aggregate concrete, Construction and building materials, vol. 23, no. 8, pp.2869-2876, (2009).

DOI: 10.1016/j.conbuildmat.2009.02.004

Google Scholar

[70] J. Xie et al., Experimental study on the compressive and flexural behaviour of recycled aggregate concrete modified with silica-fume and fibres, Construction and Building Materials, vol. 178, pp.612-623, (2018).

DOI: 10.1016/j.conbuildmat.2018.05.136

Google Scholar

[71] M. Hajforoush, A. Kheyroddin, and O. Rezaifar, Investigation of engineering properties of steel fiber reinforced concrete exposed to homogeneous magnetic field, Construction and Building Materials, vol. 252, p.119064, (2020).

DOI: 10.1016/j.conbuildmat.2020.119064

Google Scholar

[72] R. Zaharieva, F. Buyle-Bodin, and E. Wirquin, Frost resistance of recycled aggregate concrete, Cement and Concrete Research, vol. 34, no. 10, pp.1927-1932, (2004).

DOI: 10.1016/j.cemconres.2004.02.025

Google Scholar

[73] R. M. Salem, E. G. Burdette, and N. M. Jackson, Resistance to freezing and thawing of recycled aggregate concrete, Materials Journal, vol. 100, no. 3, pp.216-221, (2003).

Google Scholar

[74] A. Gokce, S. Nagataki, T. Saeki, and M. Hisada, Freezing and thawing resistance of air-entrained concrete incorporating recycled coarse aggregate: The role of air content in demolished concrete, Cement and Concrete Research, vol. 34, no. 5, pp.799-806, (2004).

DOI: 10.1016/j.cemconres.2003.09.014

Google Scholar

[75] A. Gokce, S. Nagataki, T. Saeki, and M. Hisada, Identification of frost-susceptible recycled concrete aggregates for durability of concrete, Construction and building materials, vol. 25, no. 5, pp.2426-2431, (2011).

DOI: 10.1016/j.conbuildmat.2010.11.054

Google Scholar

[76] C. Lu, Q. Zhou, W. Wang, S. Wei, and C. Wang, Freeze-thaw resistance of recycled aggregate concrete damaged by simulated acid rain, Journal of cleaner production, vol. 280, p.124396, (2021).

DOI: 10.1016/j.jclepro.2020.124396

Google Scholar

[77] R. V. Balendran, H. W. Pang, and H. X. Wen, Use of scanning electron microscopy in concrete studies, Structural Survey, vol. 16, no. 3, pp.146-153, (1998).

DOI: 10.1108/02630809810232718

Google Scholar

[78] H. Ahmed, Behavior of magnetic concrete incorporated with Egyptian nano alumina, Construction and Building Materials, vol. 150, pp.404-408, (2017).

DOI: 10.1016/j.conbuildmat.2017.06.022

Google Scholar