Laser Cladding of Ni60/WC/TiN Composite Coatings on 00Cr13Ni4Mo Hydro Turbine Blade Stainless Steel for Improvement of Wear Resistance

Kai Jin Huang; Hua Rui Jiang; Xin Lin

doi:10.4028/www.scientific.net/AMR.430-432.101

Paper Titles

Analysis of the Stability of POY Filament Structure and Properties Spun by WINGS System
p.83

Influences of Solution Treatment, Deformation Strain and Nanometric Al₂O₃ Particulate on Hardness for Nanometric Al₂O₃ Particulate Reinforced Al Alloy Matrix Composites Manufactured by Casting
p.88

Study on the Synthesis and Characters of Waterborne Polyester Resin
p.92

Effect of Carbon Nanotube on Physical and Ablative Properties of Silicone Elastomer
p.97

Laser Cladding of Ni60/WC/TiN Composite Coatings on 00Cr13Ni4Mo Hydro Turbine Blade Stainless Steel for Improvement of Wear Resistance
p.101

The Stress Relaxation Characteristic and Martensitic Transformation of Fe-Mn-Si Shape Memory Alloys under Different Deformation Condition
p.106

Effect of Inorganic Flame Retardant on the Properties of Wood/PVC Composites
p.110

Study on Magnetic Abrasive Machining for the Small Hole
p.115

Study on Modification of Micro-Crystal Muscovite by Using of Amino Silane
p.119

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 430-432Laser Cladding of Ni60/WC/TiN Composite Coatings...

Laser Cladding of Ni60/WC/TiN Composite Coatings on 00Cr13Ni4Mo Hydro Turbine Blade Stainless Steel for Improvement of Wear Resistance

Abstract:

To improve the wear property of 00Cr13Ni4Mo hydro turbine blade stainless steel, Ni-based composite coatings were fabricated on 00Cr13Ni4Mo stainless steel by laser cladding using mixed powders of Ni60, WC and TiN. The microstructure of the coatings was characterized by XRD and SEM techniques. The wear resistance of the coatings was evaluated under dry sliding wear condition at room temperature. The results show that the coatings mainly consist of Ni-based solid solution, WC and TiN phases. The coatings exhibit excellent wear resistance due to its high hardness of WC and TiN phases. The main wear mechanisms of the coatings and the 00Cr13Ni4Mo sample are different, the former is abrasive wear and the latter is adhesive wear.

You might also be interested in these eBooks

Frontiers of Advanced Materials and Engineering Technology

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 430-432)

Pages:

101-105

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.430-432.101

Citation:

Cite this paper

Online since:

January 2012

Authors:

Kai Jin Huang, Hua Rui Jiang, Xin Lin

Keywords:

00Cr13Ni4Mo Stainless Steel, Hydro Turbine Blade, Laser Cladding, Wear

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] A. K Chauhan, D.B. Goel and S. Prakash: Indian Academy of Sciences Vol. 31(2008), pp.115-120.

Google Scholar

[2] L. Shepeleva,B. Medres W.D. Kaplan,M. Bamberger and A. Weisheit: Surf. Coat. Tech. Vol. 125(2000), pp.45-48.

Google Scholar

[3] L. -M. Berge, S. Saaro, T. Naumann, M. Wiener, V. Weihnacht, S. Thiele and J. Suchánek: Surf. Coat. Tech. Vol. 202(2008), pp.4417-4421.

DOI: 10.1016/j.surfcoat.2008.04.019

Google Scholar

[4] N. Weidlich,A. Gruninger,O. Meier, K. Emiljanow, P. Stippler and F. Seidel: VDI Berichte, (2008), pp.227-233.

Google Scholar

[5] C. Chen C, H.C. Wu and M.F. Chiang: Int. Heat Treat. Surf. Eng. Vol. 2(2008), pp.140-146.

Google Scholar

[6] M. Brandt, S. Sun, N. Alam N, P. Bendeich and A. Bishop: Int. Heat Treat. Surf. Eng. Vol. 3(2009), pp.105-114.

Google Scholar

[7] F. John: Mater. Eval. Vol. 53(1995), pp.369-370.

Google Scholar

[8] R. Vilar E.C. Santos P.N. Ferreira,N. Franco and R.C. Da Silva: Acta Mater. Vol. 57(2009), pp.5292-5302.

Google Scholar

[9] Y. Gao, B.Y. Tong, Y. Liang and C.X. Shi: J. Tsinghua Univ. (Sci. &T ech. ), Vol. 43(2003), pp.754-757.

Google Scholar

[10] Y.P. Kathuriau: Surf. Coat. Tech. Vol. 132(2000), pp.262-269.

Google Scholar

[11] J. Kelly,K. Nagarathnam and J. Mazumder: J. Laser Appl. Vol. 10(1998), pp.45-54.

Google Scholar