Effects of Grinding Method on the Two-Side Direction Burr in Grinding-Hardening Machining

Jin Kui Xiong; Ju Dong Liu; Wei Yuan

doi:10.4028/www.scientific.net/AMR.505.26

Paper Titles

Improve the Quality of the Paper with a Surface Coating of Silica in Rice Husk
p.3

Standardization and System Implementation of Cutting Parameter Selection Process
p.11

Effect of Tool Edge Geometry on Cutting Force and Surface Roughness when Hard Turning Tool Steel
p.15

A Matching Selection of Cutter Tools Based on Substep Integrated Intelligent Computation
p.20

Effects of Grinding Method on the Two-Side Direction Burr in Grinding-Hardening Machining
p.26

Investigation on Chip Formation during Machining Using Finite Element Modeling
p.31

A High-Gradient Magnetic Separation System for Separating Magnetic Nanobeads from Aqueous Solution
p.39

Research on Solar Energy Technology Application for Residential Buildings in Severe Cold Regions
p.47

Analysis and Studies on the Composition of Municipal Solid Wastes
p.52

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 505Effects of Grinding Method on the Two-Side...

Effects of Grinding Method on the Two-Side Direction Burr in Grinding-Hardening Machining

Abstract:

Based on the grinding-hardening test, the types of two-side direction burr were classified; the changing rules of size in the two-side direction burr and the influence of grinding method on the maximum burr size were studied. The results shown, that the size of the burr was increased gradually from the cut-in point to the cut-out point of grinding in one-passes grinding. In two-passes grinding or three-passes grinding, the burr was basically the same. Under this experimental condition, the changing of grinding method affected the height of the burr more, but little to the thickness of the burr root. Meanwhile, the ways of restraining or decreasing the size of the burr in grinding-hardening machining were developed.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 505)

Pages:

26-30

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.505.26

Citation:

Cite this paper

Online since:

April 2012

Authors:

Jin Kui Xiong, Ju Dong Liu, Wei Yuan

Keywords:

Burr, Grinding, Grinding Method, Surface Hardening

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] J. D. Liu, G. C. Wang, D. P. Hou.: Journal of Basic Science and Engineering, Vol. 16(2008) No. 4, pp.575-579. (In Chinese).

Google Scholar

[2] G. C. Wang.: Journal of Applied Sciences, (1991) No. 3, pp.269-275. (In Chinese).

Google Scholar

[3] S. Malkin.: Grinding Technology Theory and Application. ShenYang: Northeastern University Press, 2002. (In Chinese).

Google Scholar

[4] Z. Y. Chi: Grinding and Abrasive Selection. BeiJing: Ordnance Industry Press, 1990. (In Chinese).

Google Scholar

[5] G. C. Wang.: Introducing Journal of China Ordnance, Vol. 18(1997) No. 1, pp.68-72. (In Chinese).

Google Scholar

[6] H. P. Chang.: Mechanical Management and Development, (2003) No. 4, pp.24-26. (In Chinese).

Google Scholar

[7] J. X. Reng, D. A. Hua.: Principle of Grinding and Cutting. Xi'An: Northwestern University Press, 1987. (In Chinese).

Google Scholar