Study on Anti-Corrosion Behaviour of 304 Stainless Steel in Circulating Cooling Water

Yu Chun Li; Ya Jiang; Heng Zheng; Kang Juan; Xiao Wei Liu

doi:10.4028/www.scientific.net/AMR.511.74

Paper Titles

Digital Recording of Ancient Buildings by Using VTOL UAVS and Building Materials
p.55

Test and Select of Carrier of Phase Change Materials for Asphalt Mixtures
p.60

Analyses of High Grade Strength Steel Bars in the Design of a Five-Storey Reinforced Concrete Structure with Comparison of Energy Consumption and CO₂Emission
p.64

Study on Corrosion Resistance of Brass in Circulating Cooling Water with Different Concentration Ratio
p.70

Study on Anti-Corrosion Behaviour of 304 Stainless Steel in Circulating Cooling Water
p.74

Research on Carbon Steel Test Conducted by Means of Steady-Damp Heat Periodic Immersion Method
p.78

Settlement Research and Prediction on Soft Clay Foundation
p.83

Experience and Study of Austenitic Stainless Steel Machining
p.88

Effect of Thermal Conductivity on Temperature Fluctuations in the Mixing T-Junctions Filled with Porous Metal Materials
p.92

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 511Study on Anti-Corrosion Behaviour of 304 Stainless...

Study on Anti-Corrosion Behaviour of 304 Stainless Steel in Circulating Cooling Water

Abstract:

Abstract: The corrosion behaviour of 304SS in cooling water was studied through weight-loss method and electrochemistry measurements in different concentration ratio condition. The results obtained from this study showed that 304SS material was anti-corrosive with inhibitor when concentration ratio of circulating cooling water was 3 ~ 10, especially in CR 10 condition, and the advised CR running range was 3~10.

You might also be interested in these eBooks

Advanced Research on Architectonics and Materials

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 511)

Pages:

74-77

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.511.74

Citation:

Cite this paper

Online since:

April 2012

Authors:

Yu Chun Li, Ya Jiang, Heng Zheng, Kang Juan, Xiao Wei Liu

Keywords:

Circulating Cooling Water, Concentration Ratio, Weight-Loss Measurement

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] D. Choi, S. You, J. Kim. Development of an environmentally safe corrosion, scale and microorganism inhibitor for open recirculation cooling systems. Materials Science and Engineering A. 2002, 335: 228.

DOI: 10.1016/s0921-5093(01)01928-1

Google Scholar

[2] Xiuhua Qu, Chunchun Xu, Guocheng Lv etc. Impact of Cl-, SO42- and water treatment chemicals for 304SS in circulating cooling water with low hardness. China Acta of Corrosion & Prevention [J]. 2009, 6(3): 187~190.

Google Scholar

[3] Dongmei Liu, Shuqing Jia. Study on water treatment technology with high concentration ratio [J]. Shanxi Energy & Energy Saving. 2005, 4(11): 33-34.

Google Scholar

[4] Yinhui Xia. Experimental study on cooling water strategy with high concentration ratio in thermal power plant[J]. Water Purification Technology. 2008, 27(3): 28-30.

Google Scholar