Formation and Simulation of Two-Side Burr in Orthogonal Cutting

Hai Jun Qu; Gui Cheng Wang; Yun Ming Zhu; Qin Xi Shen

doi:10.4028/www.scientific.net/AMR.53-54.77

Paper Titles

Mechanism Research on the Swirling Air Flow Compounded with Magnetic-Field Finishing
p.51

Material Removal Mechanism in Vibration-Assisted Magnetic Abrasive Finishing
p.57

Internal Magnetic Abrasive Particles Surface Finishing Based on Permanent Magnetic Field
p.65

Finite Element Modeling of Burr Formation in Orthogonal Metal Cutting
p.71

Formation and Simulation of Two-Side Burr in Orthogonal Cutting
p.77

Study on Burr Formation in Face Milling of Stainless Steel with Chamfered Cutting Tool
p.83

The Effect of Shear Strain on Transformation between Burr and Negative Burr
p.89

Numerical Study of the Effect of Tool Wear on Burr Formation in Blanking Process
p.95

Transformation of Cutting Burr/Fracture in High-Speed Machining Al Alloy
p.101

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 53-54Formation and Simulation of Two-Side Burr in...

Formation and Simulation of Two-Side Burr in Orthogonal Cutting

Abstract:

The two-side burr is one of the important factors that influence the edge quality and performance of precision parts. The two side-direction burr formation process is simulated with DeformTH3D. The mechanism of two-side burr formation is analyzed in terms of the results of the simulation. Enlarging the tool orthogonal rake and minimizing the depth of cut can reduce the burr size.