Study on Leakage Rate of HDPE/Paraffin Composite for Phase Change Materials

Huan Rui Liu; Wen Bin Yang; Xin Yi Pu; Kai Zhang

doi:10.4028/www.scientific.net/AMR.549.766

Paper Titles

Study on the Property of Bi₂(Mg_2/3Nb_1.1833Sn_0.15)O₇ Dielectric Ceramics Doped with Li₂CO₃
p.749

Study on Anti-Corrosion Performance of 20A & 316SS in Circulating Cooling Water with Different Concentration Ratio
p.753

Influences of Hydrogenation on Tensile Properties of Ti40 Alloy
p.757

Semi-Dry Desulfurization Ash Modification and Application in Autoclaved Brick
p.762

Study on Leakage Rate of HDPE/Paraffin Composite for Phase Change Materials
p.766

Influence of Different Modificatior on Structure and Mechanical Properties of Liquid Forging Aluminum Alloy
p.770

Monte Carlo Simulation on the Matrix Failure Considering the Interfacial Debonding Energy
p.774

Research Progress on Binder of Activated Carbon Electrode
p.780

Influences of Processing Parameters on Dilution Ratio of Laser Cladding Layer during Laser Metal Deposition Shaping
p.785

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 549Study on Leakage Rate of HDPE/Paraffin Composite...

Study on Leakage Rate of HDPE/Paraffin Composite for Phase Change Materials

Abstract:

Based on high density polyethylene (HDPE) as supporting and encapsulating materials, paraffin wax as energy storage materials, HDPE/paraffin composite for phase change materials was prepared in the paper. In order to low leakage rate of HDPE/paraffin composite for phase change materials, the influencing factors of leakage rate of HDPE/paraffin composite, such as temperature of mixing, time of mixing, different content of DCP, rate of cooling, were studied. The results indicated that low leakage rate of PCM could be prepared.