Preparation Methods of Copper-Steel Composite Wire

Abstract:

The domestic and foreign preparation methods of copper-steel composite wire are introduced in the paper, they are basically plating method, hot-dip plating method, continuous extrusion method, clad-welding method and hot extrusion welding method. The advantages and disadvantages of these methods are compared and analyzed. Among of them, hot extrusion welding method is a common method in foreign for producing copper clad steel wire. In recent years, the equipment and the technology are introduced by domestic companies and put it into production, it fills up the gap for producing copper clad steel wire in the domestic and it provides new market and application prospects for copper clad steel wire produced and applied in the domestic.

• Periodical: Advanced Materials Research (Volume 569)
• Pages: 223-228
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.569.223
• Online since: September 2012
• Authors: Qing Mei Wu, De Qing Wang, Yang Gao
• Keywords: Composite Material, Copper Clad Steel Wire, Preparation Method

References

[1] WU YuZhong. Study on Bimetallic Wire of Copper Clad Aluminum and Copper Clad Steel By Clad-Drawing[D]. Dalian: Ph.D. Paper of Dalian Maritime University, 2007: pp.1-2, pp.7-10, pp.78-79, pp.91-92, pp.116-117.

DOI: 10.1520/b0566-04

[2] SUN Deqin, WU Chunjing, XIE Jianxin. Forming technology research and development of metal composite wire[J]. Materials Review, 2003, 17 (5): pp.65-68.

[3] LI Baomian, LI Xinggang, XU Gangming, CUI Jianzhong. Study and application of Cu/steel clad metal[J]. Materiala Review, 2002, 2 (16): pp.22-25.

[4] HE Fei, LIU Limei, ZHONG Yun, HE Yongfu, SU Yongqing. Copper clad steel wire and its production technology[J]. Surface Technology, 2007, 36 (5): pp.78-80.

[5] LI Mingmao. Production situation and development tendency of metal composite wire[J]. Plastic engineering journal, 2005, 12 (3): pp.93-95.

[6] XIAO Qiulei, LIU Suxia, GAN Lu, ZHANG Lisheng. Manufacturing technology and the quality of the common problems of copper clad steel wire by plating method[J]. Wire and Cable, 2008, 3: pp.14-16.

[7] FANG Xiaoying, GUO Hong. Research on the performance of copper clad steel wire by hot dipping method, Material processing technology[J]. 2006, 35 (22): pp.49-51.

[8] FU Xiao, YU Jiuming, CHEN Haigeng. Process of simplified model of copper plating steel wire by hot dipping method[J]. Metal Journal, 2000, 36 (8): pp.828-832.

[9] SUN Yang, YUN Xinbing. Process optimization design of Copper clad steel by continuous extrusion method[J]. Plastic engineering journal, 2008, 15 (3): pp.204-208.

[10] YUN Xinbing, SONG Baoyun, LIU Yuanwen. Experiments research on copper clad steel wire by continuous extrusion[J]. Plastic engineering journal, 2004, 11 (6): pp.55-57.

[11] SONG Qiang, DAI Yakang, LIU Shicheng. Structure design and production process of copper clad steel wire by clad-welding method[J]. Cable material, 2003, 3: pp.44-46.

[12] S. Berski, H. Dyja, G. Banaszek, M. Janik, Theoretic analysis of bimetallic rods extrusion process in double reduction die[J]. J. Mat. Process. Technol. 2004: pp.583-588.

DOI: 10.1016/j.jmatprotec.2004.04.052

[13] D.M. Song, Finite Element Analysis on Extrusion of Composite Clad Rods[J]. M.S. Thesis. National Chiao Tung Univeristy. 2003: pp.205-207.

[14] A. Cave and J. D. Williams, The mechanism of cold pressure welding by rolling, Journal of institute of metals[J]. 1973, 101: pp.203-207.

[15] LOU Yanxiong, LIU Guicai. Non-ferrous metal wire production[M]. Changsha: Central south university press, 1999: pp.40-43.

[16] WANG Hongren, FENG Falun, WEI Xujun, LI Yan. Copper plating steel wire and its hot dipping production methods[J]. Surface technology, 1998, 27 (3): 29-32.

[17] YAN Lin, ZHONG Yi, ZHANG Zhihao. Simulation experiments and its mechanism of copper clad steel wire by continuous extrusion method[J]. Kunming university of science and technology journal, 2001, 26 (3): 101-105.

[18] YUN Xinbing, LIU Yuanwen, JIA Chunbo, SONG Baoyun. Process test research of copper clad steel wire by continuous extrusion method[J]. Plastic engineering journal, 2003, 24 (4): 78-81.

[19] FU Li, GAO Yang. Bimetallic cladding method[P]. China: 200910220463. 8, 2011. 8. 31.

[20] FU Li, GAO Yang. Bimetallic cladding machine[P]. China: 200920277006. 8, 2010. 9. 15.