Optimization of Anode Usage in Electroplating Process by Using Response Surface Methodology

Abstract:

Electroplating is a process of depositing a layer of metal onto another base metal using the electrodeposition technique, where an acid is used as a medium of transferring the desired metal onto the base metal. During electroplating some amount of anodes are wasted and burnt and ended up not being used on the end product. A series of experiments with various input parameters were carried out in order to identify the best possible setting which would result in minimum anode usage. The experiments were designed using two level full factorial design. It was observed from factorial analysis that all the input variables like the porosity of anodes in anode basket, concentration of electrolyte and applied voltage have pronounced effect on the anode usage; however, the most significant influence was from porosity. The usage of the anodes was much less as the porosity due to the arrangement of anode in anode basket decreased. The interactive affects of the input variables such as the porosity and the voltage, and the porosity and the concentration were also prominent. The optimum operating conditions were identified by response optimizer plot and were verified experimentally. Both the analytical and experimental results indicated that anode usage could be reduced by 6.12% from that of the current practice. Hence it can be concluded that the operating variables in electroplating industry have significant effect on anode usage.

• Periodical: Advanced Materials Research (Volume 576)
• Pages: 129-132
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.576.129
• Online since: October 2012
• Authors: Shahida Begum, Faris Tarlochan, Kirubaharan Sambasivam
• Keywords: Anode, Electroplating, Factorial Design, Optimization, Response, Response Surface Methodology (RSM), Wastage of Anode

References

[1] A. C. Tan, , "Tin and Solder Plating in the Semiconductor Industry: A Technical Guide, In Basic Electroplating", ed. Tan, A. C., Britain: Cambridge University Press, (1993).

[2] C.A. Harper,"Electronic Materials and Processes Handbook, In Electroplating and Deposited Electronic Coatings", ed. Chesney, M.M, New York: McGraw Hill, (2005).

[3] M. Meltzer,"Metal Bearing Waste Systems, Recycling and Treatment, In Source ReductionOpportunities in the Plating Industry", ed. T. Focke, New Jersey: Wayes Data Corporation, (1990).

[4] F.W. Bach,"Modern Surface Technology", In Fundamentals of Thin Film Technology", ed. Nicalaus, M., Wenham Germany: Wiley VGH, (2004).

[5] M. Jordan, "The Electrodepostion of Tin and its Alloys", In Basic Principles of Tin and Tin Alloy Deposition", ed. Dr. M. Jordan, Salau Germany: Eugen G.Leuze Publishers, (1995).

[6] F.Yin, J. Wang, C. Guo, L. Dalian, "Lecture Notes in Computer Science in Forecast and Control of Anode Shape", In Electrochemical Machining Using Neural Network", ed. Yin, F., Wang, J., Guo, C. and Dalian, L., Germany: Springer Verlag, (2004).

[7] Info Mine, "Mining Intelligence and Technology", http://www.infomine.com/chartsanddata/chartbuilder.aspx?z=f&g=127674&dr=5yAccessed on 8th October (2010).

[8] Holman, D., "The New Workplace: A Guide to the Human Impact of Modern Working Practices"' In Any Nearer A Better Approach", ed. Holman, D., Wall, T.D., Sparrow, P. and A. Howard, pp.395-402. West Sussex: John Wiley and Sons, (2003).

DOI: 10.1002/9780470713365

[9] Grandeza, N. and Bancud, A., "Chemical Cost Reduction at the Plating Section Through Effective Utilization of the Soluble Anodes", ASEMEP 2001 Proceedings; June, (2001).

[10] H. Kobayashi, N. Mochizuki, "The Development of High Performance Magnesium Galvanic Anodes", Corrosion, March 12 - 16, 2006, San Diego California, (2006). Modechay Schlingsinger, Milan Paunovic, "Modern Electroplating", In Tin and Tin Alloys for Lead Free Solder", ed. Zhang, Y. and Abys, J., Canada: John Wiley and Sons Inc, (2000).

DOI: 10.1002/9780470602638.ch6

[11] Hanrahan, G. and Gomez, F. A., "Chemometric Methods in Capillary Electrophoresis. In Experimental Design in Method Optimization and Robustness Testing", ed. Dejagher, B., Durand, A. and Heyden, Y., pp.62-66. New Jersey: John Wiley and Sons, (2010).

DOI: 10.1002/9780470530191.ch2

[12] Kanani, N., "Electroplating: Basic Principles, Processes and Practice", In Coating Thickness and its Measurement", ed. Nasser Kanani, pp.255-257. Oxford: Elsevier Adv. Tech. (2004).

DOI: 10.1016/b978-185617451-0/50008-7