Influence on the Stress of Pavement with Crack in Surface from Flexible Transition Layer under Dynamic Loading

Abstract:

After cracks appear in the surface layer, the stress mode of pavement structure transits from infinite continuum to limited size board, and the cracks become stress concentration areas. Based on the practical tire contact pressure and contact area, this paper establishes the C3D8R model by ABAQUS, to calculate and analyse the influence on the surface cracks extension from graded gravel transition layer under half-sinusoid load. Analysis shows that the graded gravel has excellent stress dissipation ability. Whether there are cracks in the surface layer, the graded gravel transition layer between asphalt surface layer and semi-rigid base layer could greatly reduce the tensile stresses in the bottom of semi-rigid base and subbase layers, improve the road bearing level, delay and avoid the cracks extension to deep road and prolong the road service life.

• Periodical: Advanced Materials Research (Volumes 602-604)
• Pages: 2185-2188
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.602-604.2185
• Online since: December 2012
• Authors: Shuai Tu, Ai Min Sha
• Keywords: Flexible Transition Layer, Half-Sinusoid Load, Pavement Stress, Semi-Rigid Base

References

[1] Yan MENG, Linquan GUO, Zhiming TAN: Journal of Highway and Transportation Research and Development Vol. 24-4 (2007), pp.1-6.

[2] Shutao MENG, Jianwei XU: JOURNAL OF HIGHWAY AND TRANSPORTATION RESEARCH AND DEVELOPMENT Vol. 21-6 (2004), pp.4-7.

[3] IMENOK, KAMIJIMAT, et al: 8th International Conference on Asphalt Pavement in Seattle: International Society for asphalt Pavement (1996), pp.128-140.

[4] Gongyun LIAO, Xiaoming HUANG, Application of ABAQUS in Road Engineering. Southeast University Press(2008).

[5] Kaitai FANG: Uniform Design and Uniform Design Table[In Chinese]. Science Press (1994), P. 69.