Test Study and Application of Corundum Slag in Slag-Forming of BOF

Lu Chen; Jian Hua Zeng; Yong Chen; Xin Teng Liang; Jun Chen

doi:10.4028/www.scientific.net/AMR.602-604.45

Paper Titles

Structure-Property Correlation of Composites Impregnated with Aspartimide Oligomer
p.28

Study on the Resin Curing Time and the Mechanical Properties of the Composites
p.33

Ag Supported Si-Doped Graphene for Hydrogen Sulphide Detection: A First-Principles Investigation
p.37

Influence of Interfacial Bond Strength on the Mechanical Properties of Resin Mineral Composite Reinforced by Molybdenum Fibers
p.41

Test Study and Application of Corundum Slag in Slag-Forming of BOF
p.45

The Effects of Fiber Volume Fraction on the Vibration Damping Characteristics of Three-Layer-Connected Biaxial Weft Knitted Fabric Reinforced Composite Materials
p.49

Characterization of the Interphase in Carbon Fiber/Epoxy Composites Using Force Modulation Atomic Force Microscope
p.53

Preparation of Cu₂O (Cu)/MWCNTs Composite Particles and Their Gas Sensor Properties
p.57

The Modification of Mesoporous Silica SBA-15-Type with PEG
p.62

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 602-604Test Study and Application of Corundum Slag in...

Test Study and Application of Corundum Slag in Slag-Forming of BOF

Abstract:

The paper introduced the process of slag-forming by using corundum slag in converter. The results showed that Al2O3 in corundum can reduce converter slag melting point, in advance of slag melting. Using this material, slagging process can be ahead of schedule for 30~40 seconds and the whole process of slag melting is good, without splashing, getting drying and lance-sticking. The consumption of metallic material and lime is reduced, and it shortens the melting period.