Synthesis and Properties Measurement of Pour Point Depressant

Ying Xu; Rui Guo

doi:10.4028/www.scientific.net/AMR.616-618.948

Paper Titles

Petroleum Systems in the Paris Sedimentary Basin, Europe
p.931

Petroleum Geologic Elements and Petroleum Systems in the Northern Apennines Basin
p.935

The Thinking of Shale Gas Development in China According to the US Shale Gas Development Experiments
p.939

The Parameters Optimization that Based on the Finite Element Simulation of Hydraulic Injection Radial Drilling Technology
p.944

Synthesis and Properties Measurement of Pour Point Depressant
p.948

The Geometry Research to Oil Tank’s Container Table with Changed Position
p.954

The Effects of Gap Size on Flooding in Vertical Narrow Rectangular Channels
p.959

A New Unsteady-State Model for Calculating Oil-Water Relative Permeability of Low-Permeability/Ultra-Low Permeability Reservoirs
p.964

The Effect of Water Activity in Shale on Wellbore Instability
p.970

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 616-618Synthesis and Properties Measurement of Pour Point...

Synthesis and Properties Measurement of Pour Point Depressant

Abstract:

The amidation grafted copolymers derived from styrene-maleic anhydride copolymer were prepared and characterized by FTIR. Their intrinsic viscosity and crystal morphology were measured. The prepared polymers were investigated as pour point depressants (PPD) and flow improvers for waxy crude oil, and it was found that the depression effect of PPD modified by mixture amines was more effective than single amine, and the maximum depression was obtained by the sample that modified by mixture amines from 13 °C to 4 °C (ΔPP = 9 °C, at 3 000 ppm). The effect of the PPD modified by mixture amines on the flow properties of waxy crude oil was investigated. The result show that the viscosity decreased from 1 223 mPa.s to 81.3 mPa.s at 13 °C and 3 000 ppm. In addition, the crystal morphology have also been improved for the same sample and conditions.